期刊文献+

Experiences in using gas dispersion measurements to evaluate metallurgical performance of scavenger cleaner and recleaner circuit at Vale's Thompson Mill 被引量:1

Experiences in using gas dispersion measurements to evaluate metallurgical performance of scavenger cleaner and recleaner circuit at Vale's Thompson Mill
下载PDF
导出
摘要 The performance of a flotation circuit is largely the result of the operator's response to visual clues. This includes manipulation of the gas input and how it is distributed to cells in a bank. A new gas dispersion technology was presented which was conducted to perform characterization tests in Outokumpu 30 m3 and 50 m3 flotation cells installed at Thompson Vale's concentrator, and subsequent data analysis. The experimental program was designed to establish "as-found" baseline conditions for each cell of the two-parallel banks in the scavenger-cleaner and recleaner circuit, to select and characterize one typical cell in the two banks with either different frother concentrations or different air flow rates, and establish what variables can be manipulated in future characterization work. A three-parameter model was developed in order to link the bubble size and frother concentration. This relationship can be used to correlate gas dispersion change to improved metallurgical performance. The performance of a flotation circuit is largely the result of the operator's response to visual clues. This includes manipulation of the gas input and how it is distributed to cells in a bank. A new gas dispersion technology was presented which was conducted to perform characterization tests in Outokumpu 30 m^3 and 50 m^3 flotation cells installed at Thompson Vale's concentrator, and subsequent data analysis. The experimental program was designed to establish "as-found" baseline conditions for each cell of the two-parallel banks in the scavenger-cleaner and recleaner circuit, to select and characterize one typical cell in the two banks with either different frother concentrations or different air flow rates, and establish what variables can be manipulated in future characterization work. A three-parameter model was developed in order to link the bubble size and frother concentration. This relationship can be used to correlate gas dispersion change to improved metallurgical performance.
出处 《Journal of Central South University》 SCIE EI CAS 2014年第10期3955-3962,共8页 中南大学学报(英文版)
基金 Project(2012BAB14B05)supported by National Key Technology Research and Development Program of the Ministry of Science and Technology of China
关键词 冶金性能 河谷 淡水 电路 测量 评估 气体分散 三参数模型 bubble size bubble size distribution bubble surface area flux gas dispersion
  • 相关文献

参考文献16

  • 1DAHLKE R, FINCH J A, GOMEZ C O, COOPER M, SCOTT D. Impact of air distribution profile on banks in a Zn cleaning circuit [C]// Proceedings of the 36th Annual Meeting of the Canadian Mineral Processors. Ed, Ottawa, Canada: CIM, 2004: 525-539.
  • 2ZHANG Wei, NESSET J E, RAO S R, FINCH J A. Characterizingfrothers through critical coalescence concentration (CCC95)-hydrophilic-lipophilic balance (HLB) [J]. Minerals, 2012, 2(3): 208-227.
  • 3ZHANG Wei, ZHOU X, FINCH J A. Determining independent control of dual-frother systems gas holdup, bubble size and water overflow rate [J]. Minerals Engineering, 2012, 39:106-116.
  • 4NESSET J E, HERNANDEZ-AGUILAR J R, ACUNA C, GOMEZ C O, FINCH J A. Some gas dispersion characteristics of mechanical flotation machines [J]. Minerals Engineering, 2006, 19:807-815.
  • 5PYECHA J J, LACOUTURE B, SIMS S, HOPE G, TRADLING A. Evaluation of a Microcell sparger in the Red Dog column flotation cells [J]. Minerals Engineering, 2006, 19: 748-757.
  • 6HERNANDEZ-AGUILAR J R, THORPE R, MARTIN C J. Experiences in using gas dispersion measurements to understand and modify metallurgical performance [C]// Proceedings of the 38th Annual Meeting of the Canadian Mineral Processors. Ottawa, Canada: CIM, 2006: 387-402.
  • 7HERNANDEZ-AGUILAR J R, REDDICK S. Gas dispersion management in a Cu/Mo separation circuit [C]// Proceedings of the 6th International Copper-Cobre Conference. Toronto, Canada: CIM, 2007: 173-184.
  • 8HERNANDEZ-AGUILAR J R, BASI J. Improving column flotation cell operation in a Cu/Mo separation circuit [C]// Proceedings of the 41st Annual Meeting of the Canadian Mineral Processors. Ottawa, Canada: CIM, 2009, 39-61.
  • 9NESSET J E, ZHANG Wei, FINCH J A. A benehmarking tool for assessing flotation cell performance [C]// Proceedings of 44th Annual Meeting of the Canadian Mineral Processors. Ottawa, Canada: CIM, 2012:183 209.
  • 10ZHANG Wei, KOLAHDOOZAN M, NESSET J E, FINCH J A. Use of frother with sampling-for-imaging bubble sizing technique [J]. Minerals Engineering, 2009, 22(5): 513-515.

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部