室内可见光通信发光二极管阵列发射性能的研究

Research on the light emitting diode array launching performance for indoor visible light communication

提出了一种基于Lambert辐射模型的发光二极管光源阵列发射天线光照度计算模型,对室内可见光通信发射天线进行了优化设计.分析了光源的空间分布形式、光源间距、光源中心光束与系统光轴夹角以及空间分布层间距等因素对光照度均匀性的影响.通过仿真模拟和分析,得到了圆形阵列天线在照度均匀性和通信传输信号稳定性方面都优于相同光源数目的矩形阵列天线,并且提高了10%左右;同时得出了在满足室内照明情形下,发光二极管阵列发射天线照度均匀度随光源间距及光源中心光束与系统光轴夹角的增加均呈现出先增加后减小的变化趋势,因此,光源间距和光源中心光束与系统光轴夹角均存在最优值;照度均匀度随空间分布层间距的减小而增加,并给出了5 m×5 m×3 m普通房间内发射天线阵列设计参数的最优值,使发射性能得到了优化,同时节省光源数13%,降低了成本.这些研究为发射天线系统的设计提供了理论依据,具有实用价值.

A kind of illumination calculation of array antenna composed of light emitting diode（LED） source based on Lambert radiation model is proposed. This paper puts emphasis on the optimal design for the transmitting antenna of indoor visible light communication. And it also analyzes the influence of the forms of the spatial distribution of the light source,the distance between light sources, and the angle between the center beam of light source and optical axis of the system,as well as the layer spacing of space distribution on illumination uniformity. A circular array antenna is superior to a rectangular array antenna containing the same number of light sources in illumination uniformity and stability of signal transmission, which may increase by 10%. As the distance between light sources and the angle between the center beams of light sources and optical axis keep increasing, the illumination uniformity of array antenna composed of LED source increases first and then starts to drop. As a result, there exist the optimal values in the distance and the angle respectively. Illumination uniformity increases with the decrease of the distance of space distribution. The optimal value of design parameter of transmitting antenna array in a common room has been given, therefore, it optimizes launch performance, saves as much as 13% the number of light source and reduces the cost. These studies for the design of the transmitting antenna system provide a theoretical basis and practical values.