期刊文献+

时间参数为非正态分布的CAN总线数据传输可靠性分析 被引量:2

Analysis of Non-normal Distribution Time Parameters Data Transmission Reliability in CAN Bus
下载PDF
导出
摘要 数据传输可靠性对于CAN总线系统的设计影响重大,关系到整个总线系统的正常运行。以CAN总线可调度理论为依据针对总线系统中报文传输进行研究分析,利用可靠性四阶矩概率分析方法通过推导公式,以一个算例对CAN总线系统报文传输可靠性进行分析并计算;编程利用MONTE-CARLO方法进行模拟对比,从而得到了总线报文的传输可靠度。利用四阶矩可靠度计算方法对报文传输的可靠性灵敏度进行分析计算,得到的结果与定性分析一致,验证了四阶矩方法可靠性灵敏度计算的正确;通过以上的计算方法可以为调度理论的进一步研究提供理论依据,具有十分重要的实际意义。 The message transmission reliability is very important for the design of the CAN (Con-troller Area Network)bus system,which is related to the normal operation of the bus control system. The bus message transmission time parameters are analyzed based on the CAN bus scheduling theory. The formula is a derived by means of probability a-nalysis based on the fourth moment method.An example is calculated to get its message reliability and the result is contrasted with the MONTE CARLO method simulation,and then the bus mes-sage transmission reliability can be got.The relia-bility sensitivity of the message transmission is an-alyzed and calculated.The result is consistent with the qualitative analysis,which proves the correct-ness of reliability sensitivity using the fourth mo-ment method.The method provides the foundation for the scheduling theory studies.It has great prac-tical significance.
作者 刘宇 宋桂秋
出处 《机械与电子》 2014年第11期16-20,45,共6页 Machinery & Electronics
基金 中央高校基本科研业务费资助(N110303006)
关键词 CAN 总线 四阶矩方法 可靠性 灵敏度 MONTE CARLO 模拟 CAN bus fourth moment meth-od reliability sensitivity MONTE CARLO simu-lation
  • 相关文献

参考文献10

  • 1曹万科,张天侠,刘应吉,杨京峰.基于RMA方法的汽车车身CAN总线优化设计[J].汽车工程,2007,29(12):1098-1101. 被引量:12
  • 2曹万科,张天侠,张霏霏,张芙君,王永富.汽车CAN总线可视化实时性分析研究及仿真[J].系统仿真学报,2008,20(9):2345-2347. 被引量:11
  • 3刘宇,张义民.CAN总线数据传输可靠性分析[J].机械科学与技术,2011,30(6):888-891. 被引量:11
  • 4Ray A, Halevi Y, Integrated communication and control systems:part I -analysis and part II -design considera- tion[J]. ASME Journal of Dynamic System Measure- ment Control,1988,110367- 381.
  • 5Wang S H,Zhang T X,Zhang G S. Scheduling design of automotive TTCAN control system based on aver- age loading[C]//Proceedings of the 8th World Con- gress on Intelligent Control and Automation, Jinan, China, 2010 : 6772 - 6775.
  • 6Zhang M Y,D x h,Liu L Q. An approach of robust re- liability design for mechanical components[J], proceed- ings of the institution of mechanical engineers. Part E: Journal of Process Mechanical Engineering, 2005,219 (11) :275 - 283.
  • 7苏长青,张义民,吕春梅,马辉.转子系统振动的频率可靠性灵敏度分析[J].振动与冲击,2009,28(1):56-59. 被引量:10
  • 8Ang A H - S,Tang W H. Probability concepts in engi- neering planning and design, Vol. 2, Decision, Risk, and Reliability[M]. New York: John Wiley Sons, Inc. , 1984.
  • 9李云贵,赵国藩.结构可靠度的四阶矩分析法[J].大连理工大学学报,1992,32(4):455-459. 被引量:37
  • 10Zhao Y G,Ono T. Moment methods for structural re- liability[J]. Structural Safety, 2001,23 ( 1 ) : 47 - 75.

二级参考文献39

共引文献76

同被引文献14

引证文献2

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部