期刊文献+

Fe^(2+)/ATP复合催化剂处理阳离子红X-GRL的研究

The Study on the Fe^(2+)/ATP Composite Catalyst Treatment of Cationic Red-GRL
下载PDF
导出
摘要 以凹凸棒分散液为吸附剂,Fe2+/ATP为复合催化剂对印染废水中的阳离子红X-GRL进行处理实验。主要分析了Fe2+负载时间、反应温度和Fe2+溶液浓度对吸附性能的影响以及影响凹凸棒土联用Feton法与阳离子红反应的因数。实验结果显示,制备ATP/Fe2+的合适的条件为:凹凸棒土煅烧温度为400℃;负载铁时间为5 h;负载铁浓度为1 500 mg/L;负载温度为80℃。 Using attapulgite dispersed liquid as sorbent, Fe2+/ATP composite catalyst was used for processing experiment of cationic red-GRL in printing and dyeing wastewater. Factor Fe2+ load time, reaction temperature and concentration of Fe2+ solution on the adsorption properties and the influence effect of attapulgite in combination with red reaction of Feton method and reaction were mainly analyzed. The experimental results showed that the suitable conditions of preparation of ATP/Fe2+ were attapulgite calcining temperature of 400 ℃, iron loaded time of 5 h, the load of iron concentration of 1 500 mg/L and the load temperature of 80 ℃.
作者 王会芳 沈磊
出处 《广州化工》 CAS 2014年第22期57-59,共3页 GuangZhou Chemical Industry
基金 大学生实践创新项目论文
关键词 凹凸棒 阳离子红X-GRL 印染废水 attapulgite cationic red-GRL printing and dyeing wastewater
  • 相关文献

参考文献4

二级参考文献26

共引文献118

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部