摘要
通过评估阴极射线管(CRT)含铅玻璃及其冶炼后废渣的环境影响,有助于CRT玻璃回收和处置.本文采用醋酸缓冲液法(HJ/300-2007)研究了CRT的三种含铅玻璃及其铅冶炼后废渣的铅浸出特性,结果表明锥玻璃、颈玻璃和熔接玻璃铅浸出浓度均超出危险废物浸出标准,其中熔接玻璃中的铅极易溶出,在CRT玻璃中毒性最大;而铅冶炼废渣中的铅也极易溶出,废渣中的含铅量应低于1.5%才可视为一般固体废弃物.除了铅在化合物中的含量,铅的赋存结构使铅化合物浸出毒性差异很大.
Evaluating the environmental impact of different cathode ray tube （CRT） leaded glass parts and its slag after lead extraction by smelting was helpful for the recycling and disposal of CRT glass. This study investigated the Pb leaching characteristics of different leaded CRT glass parts and its slag after lead extraction by HJ/T300-2007. The results showed lead leaching concentrations of funnel, panel, and frit glass all exceeded the threshold of leaching concentration for hazardous waste, and lead in frit glass was very easy to leach, contributing most to CRT toxicity;lead in slag was also very easy to leach, and leaded slag could be regarded as general solid waste only if its lead concentration was below 1.5%. Except for the Pb content in the material, Pb structure contributed a lot to the difference of Pb leaching.
出处
《中国环境科学》
EI
CAS
CSCD
北大核心
2014年第12期3237-3241,共5页
China Environmental Science
基金
国家自然科学基金资助项目(21177069)
