单相AC-DC变换电路设计及试验

Design and test of single-phase AC-DC conversion circuit

该单相AC？DC变换电路以有源功率因数控制器UCC28019为核心，STM32F103做主控芯片，采用主控芯片片上DAC调节UCC28019电压误差放大器反馈端，控制输出电压稳定输出；设计功率因数测量电路、输出保护电路、功率因数调整电路等电路模块。经测试，系统输入电压为24 V时，输出2 A电流时可稳定输出36 V电压，负载调整率为0.02%，电压调整率为0.028%，功率因数测量最大误差为0.02，过流保护动作电流为2.54 A，交流输入侧功率因数校正后最高达99.9%，转换效率达96.7%，功率因数在0.8~1.0稳定可调。

With controller chip STM32F103,active Power Factor Controller UCC28019 as a core of the system,the voltage error amplifier feedback of the UCC28019 is adjusted by means of on？chip DAC in STM32F103 to achieve a stable output vol？tage. The power factor measurement circuit,output protection circuit,power factor adjustment circuit were designed. Test results show that when input voltage is 24 V and output current is 2 A, the system can output 36 V voltage stably,its load regulation rate is 0.02%,voltage regulation rate is 0.028%,the maximum error of power factor measurement is 0.02,overcurrent protec？tion operating current is 2.54 A, conversion efficiency is 96.7%,power factor is adjustable from 0.8 to 1.0 stable.