摘要
采用熔融挤出法制备了聚酰胺6/氯化锂/环氧树脂E51(PA6/Li Cl/E51)复合材料,研究了E51用量对复合材料结晶行为及物理力学性能的影响。结果表明:随着E51用量的增加,PA6/Li Cl/E51复合材料的结晶度和熔融温度逐渐降低;复合材料的拉伸强度、弯曲强度、缺口冲击强度和维卡软化温度则均呈先升后降的趋势,并都在E51用量为3 phr时达到最大值,分别为90.08 MPa、104.6 MPa、8.1 k J/m2和73℃。
Polyamide 6/lithium chloride/epoxy resin E51（PA6/LiCI/E51） composites were prepared by melt- extrusion method, and the effects of E51 content on crystallization behavior, physical and mechanical properties of the composites were studied. The results show that： with the increasing of E51 content, the crystallinity and melting temperature of PA6/LiCI/E51 composite have a gradually decreasing trend; the tensile strength, flexural strength, notched impact strength and Vicat softening temperature of PA61LiClIE51 increase firstly and then decrease, and when the content of E51 is 3 phr, the tensile strength, flexural strength, notched impact strength and Vicat softening temperature of the composite are 90.08 MPa, 104.6 MPa, 8.1 k Jim2 and 73℃ respectively, and each of them reaches the maximum.
出处
《塑料科技》
CAS
北大核心
2015年第1期65-68,共4页
Plastics Science and Technology
基金
贵州省优秀青年科技人才培养对象专项资金项目(黔科合人字[2013]33号)
贵州省教育厅研究生卓越人才计划项目(黔教研ZYRC字[2013]006号)
关键词
聚酰胺6
环氧树脂
氯化锂
结构
性能
Polyamide 6
Epoxy resin
Lithium chloride
Structure
Property
