期刊文献+

组织结构对片层TiAl合金氧化行为影响 被引量:10

Effects of Microstructure on Oxidation Behavior of Lamellar TiAl Alloys
原文传递
导出
摘要 以Ti-48Al-2Cr-2Nb(at%)合金为研究对象,通过热处理获得近片层和全片层两种显微组织,并在800℃空气条件下,进行了100 h的抗氧化性实验。利用OM、SEM、TEM、XRD和EDS对试样的微观结构、相组成及微区成分进行了分析。恒温氧化动力学结果表明:在800℃空气条件下,对于近片层和全片层两种Ti Al合金组织,其恒温氧化动力学曲线符合近抛物线规律,且近片层组织合金的抗氧化性能优于全片层组织。基于氧化动力学曲线、组织结构、氧化膜结构、氧化表面形貌分析,表明Ti Al合金的片层组织结构对其氧化行为具有不可忽视的影响。 The oxidation behavior of Ti-48A1-2Cr-2Nb alloys with fully lamellar and nearly lamellar microstructure achieved by different heat treatments was investigated by a thermogravimetric method at 800 ℃ for 100 h. The morphology, phase composition and element distribution of the specimens were analyzed by OM, SEM, TEM, XRD and EDS. It is found that oxidation kinetic curves of the TiA1 alloys with nearly lamellar and fully lamellar microstructures accord with the parabolic curve law. And nearly lamellar microstructure has better oxidation resistance than fully lamellar microstructures, when the specimens are at 800 ℃ in air. Based on the analysis of oxidation kinetic, microstructure of substrate, microstructure of scale, surface morphology and phase of the sample, it is concluded that the microstructure of TiA1 alloy castings has a significant influence on the oxidation behavior.
出处 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2014年第12期3031-3036,共6页 Rare Metal Materials and Engineering
基金 国家重点基础研究发展计划资助(2011CB605503)
关键词 TIAL合金 显微组织 片层结构 氧化行为 TiAl alloys microstructure lamellar structure oxidation behavior
  • 相关文献

参考文献32

  • 1Kim Y W. JOM Journal of the Minerals, Metals and Materials Society[J], 1994,46(30):9.
  • 2Clemens H, Mayer S. Advanced Engineering Materials[J]f 2013, 15:191.
  • 3Kothari K, Radhakrishnan R, Wereley N M. Progress in Aerospace Sciences[J], 2012, 55: 1.
  • 4曲选辉,黄伯云,吕海波,黄培云.TiAl有序合金研究综述[J].稀有金属材料与工程,1991,20(4):3-14. 被引量:24
  • 5Locci I E, Brady M P, Smialek J L. MRS Proceedings[C]. Cambridge: Cambridge University Press, 2001: 5.
  • 6Rahmel A, Schtitze M, Quadakkers W J. Materials and Corrosion[J]. 1995, 46(5): 271.
  • 7Yang R,Cui Y Y,Dong L M et al. Journal of Materials Processing Technology[J]. 2003, 135(2): 179.
  • 8Wang C, Wang W, Zhu S et al. Corrosion Science[J] 2013,73: 284.
  • 9Zhang H, Peng X, Wang F. Surface and Coatings Technology [J], 2012, 206(8): 2454.
  • 10Malecka J. Corrosion Science[J], 2012, 63: 287.

二级参考文献35

  • 1J.S. Pan and Y. W. Yuan (Department of Materials Science and Engineering, Tsinghua Universityt Beijing 100084, China)(Department of Materials Science and Engineering, Tsinghua Universityt Beijing 100084, China).GROWTH MECHANISM OF TiC WHISKERS PREMRED BY A MODIFIED CHEMICAL VAPOR DEPOSITION METHOD[J].Acta Metallurgica Sinica(English Letters),1999,12(3):278-282. 被引量:7
  • 2张宁,林均品,王艳丽,陈国良.合金元素Y对高铌TiAl高温合金长期抗氧化性的影响[J].航空材料学报,2006,26(6):42-45. 被引量:13
  • 3Djanarthany S, Viala JC, Bouix J. Materials Chemistry and Physics[J], 2001, 72 (3): 301.
  • 4Wu X H. Intermetallics[J], 2006, 14(10-11): 1114.
  • 5Kim Y. The Journal of the Minerals, Metals, and Materials Society[J], 1994, 46(7): 30.
  • 6Shida Y, Anada H. Oxidation of Metals[J], 1996, 45(1): 197.
  • 7Yoshihara M, Miura K. lntermetallics[J], 1995, 3(5): 357.
  • 8nShida Y, Anada H. Materials Transactions-JIM[J], 1994, 35(9): 623.
  • 9Shida Y, Anada H. Corrosion Science[J], 1993, 35(5-8): 945.
  • 10Kim B G, Kim G M, Kim C J. Scripta Metallurgica et Materialia[J], 1995, 33(7): 1117.

共引文献55

同被引文献88

引证文献10

二级引证文献50

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部