双相钢在不同工艺路径下的回弹特性研究
摘要
分析L型、U型、V型三种冷弯形式条件下双相钢的回弹规律,为回弹的控制及补偿提供试验依据。试验表明强度、厚度、弯曲角度、压边力、圆角半径均会对回弹产生不同的影响;对于不同成型工艺条件,应采取不同的方法以减小回弹。
出处
《汽车工艺与材料》
2014年第11期1-5,共5页
Automobile Technology & Material
参考文献12
-
1郭超群,陈军,陈劼实,徐栋恺,于翔宇,白燕超.超高强度钢薄板扭曲回弹特性的数值模拟与试验分析[J].上海交通大学学报,2010,44(4):468-472. 被引量:9
-
2I,. C. Zhang, T. X. Yu. An Experimental Investiga- tion into the Stamping of Elastic--Plastic Circular Plates. Journal of Materials Processing Technology. 1991,28 : 321- 334.
-
3L. J. Vin. Curvature Prediction in Air Bending of Metal Sheet. Journal of Materials Processing Technology. 2000, 100: 257-261.
-
4W. P. Carden,L. M. Geng, D. K. Matlock,R. H. Wagoner. Measurement of Spring-back. International Jour- nal of Mechanical Sciences. 2002,44 : 79-101.
-
5C C Chu. The effete of restraining force on spring-back . Interaetional Journal of Solids and Struemres, 1991,27(8): 1035-1046.
-
6Chongqing Du, I,i Zhang, Neng-Ming Wang. Spring-backPrediction in sheet fimning simulation,SAE940937.
-
7柴海啸,胡树根,宋小文.基于几何回弹量补偿的模具型面修正方法[J].模具工业,2006,32(11):9-12. 被引量:10
-
8Chuao-Tao Wang, Gary L Kinzel , Taylan Altan.Process simulation and spring-back control in plane strain sheet bending.SAE 1993TRANSACTIONS, 930280.
-
9M.Inamdar, etc. Development of an Artificial Neural Net- work to Predict spring-back in Air Vee Bending, Adv Manuf Teeh nol,2000,16:376-381.
-
10石磊,肖华,等,先进高强度钢板弯曲类回弹特性的试验研究[J].
二级参考文献8
-
1张冬娟,崔振山,李玉强,阮雪榆.材料强化模型对板料回弹量的影响[J].上海交通大学学报,2006,40(10):1671-1674. 被引量:11
-
2Papeleux L, Ponthot J P. Finite element simulation of springback in sheet metal forming[J]. Journal of Materials Processing Technology, 2002,125-126 : 785-791.
-
3Oliveira M C, Alves J L, Chaparro B M, etal. Study on the influence of work-hardening modeling in spring- back prediction [J]. International Journal of Plasticity, 2007,23: 516- 543.
-
4Andersson. Numerical and experimental evaluation of springback in advanced high strength steel [J]. JMEPEG, 2007,16 : 301-307.
-
5Lee Myoung-Gyu, Kim Daeyong. Springback evaluation of automotive sheets based on isotropic kinematic hardening laws and non-quadratic anisotropie yield functions. Part Ill. Applications [ J ]. International Journal of Plasticity, 2005,21 : 915-953.
-
6Chou Inan, Hung Chinghua. Finite element analysis and optimization on springback reduction[J]. International Journal of Machine Tools and Manufacture, 1999, 39:517-536.
-
7林瑞璋,王万强,陈文贤.逆向过程软体Surfacer使用手册[M].台湾:全华科技图书股份有限公司,2002.
-
8夏欣,卫原平,李发致,任吉.板料冲压成形工艺参数的计算机优化[J].上海交通大学学报,1999,33(2):178-180. 被引量:10
共引文献22
-
1周宇.汽车覆盖件冲压成形CAE的回弹研究[J].汽车科技,2005(6):40-42. 被引量:5
-
2康永林,邝霜,刘仁东,严玲.汽车用冷轧双相钢的生产工艺及组织性能特征[J].鞍钢技术,2008(4):1-8. 被引量:20
-
3陈炜,陈红辉,谢俊,刘建祥,肖翀宇,翟云峰.基于回弹补偿的模具型面设计方法研究[J].锻压技术,2008,33(6):86-90. 被引量:14
-
4勾治践,刘赛,王剑宇.移动公差在车身零件装配工艺设计中的应用研究[J].汽车工程,2009,31(11):1100-1103. 被引量:2
-
5勾治践,刘赛,王剑宇.移动公差在车身零件工艺设计中的应用研究[J].机械设计与制造,2010(2):75-77.
-
6廖娟,周驰,阮锋.高强度钢板在双向等曲率模中的成形回弹研究[J].中南大学学报(自然科学版),2011,42(6):1629-1635. 被引量:5
-
7白玉宁.回弹补偿技术在模具型面设计中的应用[J].机电信息,2011(27):139-140.
-
8张宏伟,贺尔铭,赵志彬.基于UG/MFC的复杂弯曲件回弹修正算法研究[J].科学技术与工程,2012,20(5):1061-1064.
-
9谢晖,潘志红,洪健程,杨岩,张建,胡蕾.高强钢板冲压全工序回弹补偿研究[J].模具技术,2012(5):1-5. 被引量:4
-
10谢晖,潘志红,蒋浩民,徐伟力,吴磊.高强钢板冲压位移回弹补偿技术研究与应用[J].塑性工程学报,2012,19(5):72-77. 被引量:11
-
1康国政,高庆,蔡力勋,杨显杰.SS304不锈钢循环变形行为温度效应的实验研究[J].材料工程,2003,31(10):34-36. 被引量:8
-
2石前列,吴向东,武友德.基于有限元的落地镗铣床滑枕结构设计[J].机械设计与制造,2012(4):19-21. 被引量:3
-
3王瑞.基于Moldflow的隐形眼镜盒的模流分析[J].模具工程,2010(12):79-82.
-
4文艺,姜涛,邬冠华,刘春江,孔焕平.3D打印两相钛合金组织性能研究现状[J].失效分析与预防,2016,11(1):42-46. 被引量:14
-
5张红英,欧阳八生.注塑成型工艺中的翘曲变形[J].模具技术,2016(3):46-51. 被引量:8
-
6张小恒,庞桂兵,蔡晓,张利萍,赵秀君,郑剑平,王滨.悬浮阴极电化学加工单出口形式下流场的FLUENT仿真分析[J].大连工业大学学报,2015,34(1):68-72.
-
7刘明珠.薄齿形散热片浇铸模设计方案[J].模具制造,2014,14(7):70-73.
-
8赵彬,杨英丽,赵恒章,吴金平,郭荻子.高强钛合金环形管热推弯曲工艺研究[J].材料工程,2009,37(S1):167-171. 被引量:2
-
9王玉华,高霖,王辉,崔震,张青来,肖富贵.AZ31B镁合金的数控热渐进成型工艺[J].机械工程材料,2009,33(7):95-97. 被引量:6
-
10张帆,陈利民.轿车塑料轮罩的热流道叠式模具设计[J].工程塑料应用,2008,36(12):55-59.