摘要
The flow characteristics of high-temperature flue gas are important in the heat transfer of coal-water slurry（CWS） combustion furnaces.The flow field of a 250 kg/h vertical-type slag tap cyclone furnace was non-intrusively investigated,using two-dimensional particle-image velocimetry（2D PIV）.The method was verified using traceable fly ash particles in high-temperature flue gas.The flow field of the flue gas was analyzed with a time-averaged method,based on which the effects of excess air ratio and loading were investigated.The flue gas separated by a gas separator maintained good rigidity near the furnace wall,rather than eroding the heating surface.Numerical simulations validated the reliability of PIV under the actual circumstances within the furnace.This study provides guidelines for applying 2D PIV in analyzing flue gas in thermal test boilers.
The flow characteristics of high-temperature flue gas are important in the heat transfer of coal-water slurry（CWS） combustion furnaces.The flow field of a 250 kg/h vertical-type slag tap cyclone furnace was non-intrusively investigated,using two-dimensional particle-image velocimetry（2D PIV）.The method was verified using traceable fly ash particles in high-temperature flue gas.The flow field of the flue gas was analyzed with a time-averaged method,based on which the effects of excess air ratio and loading were investigated.The flue gas separated by a gas separator maintained good rigidity near the furnace wall,rather than eroding the heating surface.Numerical simulations validated the reliability of PIV under the actual circumstances within the furnace.This study provides guidelines for applying 2D PIV in analyzing flue gas in thermal test boilers.
基金
supported by the National Basic Research Program of China(No.2012CB214906)
the Natural Science Foundation of China(No.51176162)
