期刊文献+

同步带张紧轮注塑模具RTM工艺树脂流动模拟分析

The Flowing Simulation Analysis of the Synchronous Belt Tensioner Injection Mold Resin with the RTM Technology
下载PDF
导出
摘要 RTM工艺树脂流动的模拟对于其模具的设计有着重要的价值。就本文而言,通过同步带张紧轮注塑模具的分析,其数值的模拟对于其工艺控制有着较大的促进作用。须知道,数值充模是其工艺成型过程的关键环节,通过树脂渗透过程,逐步地指出其树脂流动的曲线。其计算结果与试验结果是基本一致的。 Through the effective analysis,the simulation of resin flow in RTM which is designed for the mold has the important realistic value. In this paper,with the synchronous belt tensioner injection mold,the numerical simu-lation has a greater role for the controling of the process. All we must know,the numerical filling is the key step for the molding through the process of the resin infiltration. It is gradually designed for the flowing curve of resin. The results of the calculation is agreed well with the experiment.
出处 《合成材料老化与应用》 2014年第6期65-69,共5页 Synthetic Materials Aging and Application
关键词 同步带张紧轮注塑模具 RTM工艺 数值充模 场模拟 the injection mold of the synchronous belt tensioner the RTM the numerical simulation of mold filling
  • 相关文献

参考文献3

  • 1Martin G Q, Son J S. Fluid Mechanics of Mold Filling for Fiber Reinforced Plastics. Proc of theASM/ESD 2nd Conf on Adv Composites [ C ]. Michigan, 1986 : 149 - 157.
  • 2Bruschke M V, Advani S G. Filling simulation of complex threedimensional shell-like structures [ J ]. Polym Comp, 1990,11 (6) : 398 - 405.
  • 3段跃新,孙玉敏,张佐光.RTM工艺工字梁构件的模拟与实验研究[J].航空学报,2006,27(6):1223-1228. 被引量:6

二级参考文献6

共引文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部