期刊文献+

乳状液在储层中的注入性研究 被引量:3

Study on injection of emulsions in reservoir bed
下载PDF
导出
摘要 制备了一种稳定的水包油型乳状液体系,开展了此乳状液在30 cm长均质柱状岩芯的渗流实验,模拟乳状液在不同渗透率模拟储层中运移的过程。实验结果表明,平均粒径为3.673μm的乳状液在渗透率0.6~1μm^2的岩芯中注入性和调驱能力都较好;当乳状液平均粒径与孔道平均直径的比值dr≤0.33时,乳状液的注入性较好,当dr〉0.33时,随着dr的增大,乳状液的注入性迅速变差。 A kind of stable O/W emulsion was prepared in the laboratory: Seepage experiments of this emulsion in homogeneous cylindrical core with the length of 30 cm were carried out to simulate the seepage process of emulsion in reservoir beds with separate permeability. The experimental results showed that the emulsion with particles of 3. 673 μm average diameter can be injected into deep of the core. In the cores with permeability from 0.6 to 1 μm^2 ,the emulsion has good property both in profile control and injection. When the ratio of aver- age diameter of emulsion and average diameter of core is less than 0. 33,the property of injection is well. When the ratio of average diameter of emulsion and average diameter of core is larger than 0.33, as the ratio increa- ses, the property of injection decreases quickly.
出处 《日用化学工业》 CAS CSCD 北大核心 2015年第1期28-31,共4页 China Surfactant Detergent & Cosmetics
关键词 乳状液 注入性 渗透率 粒径匹配 阻力系数 emulsion injection permeability particle size match resistance coefficient
  • 相关文献

参考文献8

二级参考文献36

  • 1朱怀江,杨普华.化学驱中动态界面张力现象对驱油效率的影响[J].石油勘探与开发,1994,21(2):74-80. 被引量:51
  • 2刘华杰,柳松.多重乳状液的稳定性及其在食品工业中的应用[J].食品研究与开发,2007,28(3):169-173. 被引量:12
  • 3北京大学化学系胶体学教研室.胶体与界面化学实验[M].北京:北京大学出版社,1993.34-44.
  • 4[3]FAROUG ALI S M. Recovery of Llaydminster and Morichal Crudes by Caustic, Acid and Emulsion Floods[A]. 29th Anunal Meeting of the Petrolenm Society of CIM[ C]. 1978.
  • 5[1]CASTOR T P, SOMERTON W H, KELLY J F. Recovery Mechanisms of Al Kaline Flooding Shah D O[ A]. Surface phenemena in EOR[C], 1979.
  • 6[2]CLAYTON D, MCAULIFFE. Oil - in - Water Emulsions and Their Flow Properties in Porous Media [ J ]. J P T,1973. 727-733.
  • 7LAURIER L. Schramm,Emulsions ..Fundamentals and Applications in the Petroleum Industry[M]. Washington : Chemical Society, 1992.
  • 8JAMAL A K. Modeling of emulsion flow in porous media,journal of Canadian petroleum technology [J].The Journal of Canadian Petroleum Technology, 1995,34(6):30-38.
  • 9KHAMBHARATANA F, THOMAS S. Macroemulsion rheology and drop capture mechanism during flow in porous media[C]. SPE 48910,1998. 657-665.
  • 10SOO H,RADKE C J. Velocity effects in emulsion flow through porous media,journal of colloid and interface science [J]. Journal of Colloid and Interface Science,1984,102 (2) : 462-476.

共引文献140

同被引文献37

引证文献3

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部