Profit Optimization of External Cylindrical Grinding
Profit Optimization of External Cylindrical Grinding
参考文献11
-
1Gupta, R., Shishodia, K. S., and Sekhon, G. S. 2001. "Optimization of Grinding Process Parameters Using Enumeration Method." Journal of Materials Processing Technology 112 (1): 63-7.
-
2Stephen, M., Yoram, K., and Ber, A. 1980. "Off-Line Grinding Optimization with a Micro-computer." CIRP Annals--Manufacturing Technology 29 (1): 213-6.
-
3Vu Ngoc Pi, Phan Quang The, Vu Hong Khiem, and Nguyen Ngoc Huong. 2013. "Cost Optimization of External Cylindrical Grinding." Applied Mechanics and Materials 312: 982-9.
-
4Inasaki, I. 1991. "Monitoring and Optimization of Internal Grinding Process." CIRP A nnals--Manufacturing Technology 40 ( 1 ): 359-62.
-
5Xiao, G., and Malkin, S. 1996. "On-Line, for Internal Plunge Grinding." CIRP Annals--Manufacturing Technology 45 (1): 287-92.
-
6Wen, X. M., Tay, A. A. O., and Nee, A. Y. C. 1992. "Micro-computer-Based Optimization of the Surface Grinding Process." Journal of Materials Processing Technology 29 (1-3): 75-90.
-
7Warnecke, G., and Barth, C. 1999. "Optimization of the Dynamic Behavior of Grinding Wheels for Grinding of Hard and Brittle Materials Using the Finite Element Method." CIRP Annals--Manufacturing Technology 48 (1): 261-4.
-
8Vu Ngoc Pi. 2009. "Profit Optimization of Abrasive Blasting Systems." Key Engineering Materials 389-90: 392-7.
-
9Karpuschewski, B. 2004. "Fundamentals of Machine Tools." Lecture Note, Delft University of Technology.
-
10Kozuro, L. M., Panov, A. A., Remizovski, E. I., and Tristosepdov, P. S. 1981. Handbook of Grinding. Minsk: Publish Housing of High-Education. (in Russian).
-
1金明刚,刘妍.机床B轴五轴复合加工常用结构的分析[J].科技传播,2012,4(11):136-136.
-
2周志良.自制曲线运动速度方向演示仪[J].物理通报,2014,43(2):129-129.
-
3张天鹏,刘玉文,王海龙.2.5吨米液压模锻锤的运动及力能分析[J].重型机械,1989(2):42-47.
-
4李成己,陈守强,王钰锞.内螺纹加工铣刀的直径选择分析[J].煤矿机械,2012,33(5):128-130. 被引量：2
-
5刘承尧,朱俊秋.检测湿型砂抗拉强度的新方法——双冲裂试验[J].中国铸机,1992(4):10-14. 被引量：2
-
6吴文晨.优质网用不锈钢微细丝的生产要素与装备配套[J].金属制品,2004,30(3):1-4.
-
7王婷婷.基于层次分析法的外圆磨床安全性评估[J].机电安全,2014,0(9):22-24.
-
8孟鉴,谢万刚,张璧.纳米结构陶瓷涂层的外圆磨削力以及磨削表面精度的实验研究(英文)[J].纳米技术与精密工程,2004,2(4):266-273. 被引量：2
-
9张玉成.基于AMESim仿真技术的高速剪切机缓冲系统的设计[J].塑性工程学报,2014,21(3):137-141.
-
10范允征,廖萍.对活塞销外圆磨削加工工艺试验数据的统计分析[J].大学数学,1994,15(3):43-47.
