期刊文献+

超(超)临界机组P92钢厚壁管道修复的焊接工艺设计

Welding process to repair thick-walled P92 steel pipe in ultra-supercritical unit
下载PDF
导出
摘要 P92钢凭借其优良的高温力学性能和良好的焊接性,广泛应用于国内超(超)临界电站的主蒸汽和再热热段管道等高温高压管道。目前P92钢的焊接工艺不是很完善,特别是主蒸汽及再热热段管道等大壁厚大直径管道中,焊接接头容易出现焊接缺陷问题。文中通过对某超(超)临界电站P92钢主蒸汽及再热热段管道焊接接头进行修复,探索出一种可靠的焊接修复工艺。 For its excellent high-temperature mechanical properties and well weldability,P92 steel are widely used in hi:gh temperature and high pressure pipe of ultra-supercritical power stations such as main steam pipe and hot reheat pipe in China.The welding technology of P92 steel is not much perfect,especially for the thick walled and large size pipes such as the main steam pipe and hot reheat pipe,it is easy to form welding defects.By repairing the welded joint in the main steam pipe and hot reheat piping of P92 steel in ultra-supercritical power stations,a reliable welding repair process was developed.
出处 《焊接》 北大核心 2014年第12期48-51,67,共4页 Welding & Joining
关键词 超(超)临界 P92钢 焊接修复 ultra-supercritical P92 steel weld repair
  • 相关文献

参考文献6

二级参考文献43

  • 1张红军,周荣灿,唐丽英,于在松.P92钢650℃时效的组织性能研究[J].中国电机工程学报,2009,29(S1):174-177. 被引量:35
  • 2王淦刚,赵军,赵建仓,杨晓东,迟鸣声,甄佳威,李建勇,朱平,刘非凡,杨富.P92新型耐热钢焊接接头的力学性能研究及其工程应用[J].电力设备,2007,8(5):1-5. 被引量:14
  • 3乔亚霞,郭军.电站锅炉用马氏体耐热钢P92钢的焊接[J].电力建设,2007,28(6):87-90. 被引量:13
  • 4李宜男,杨松,丁冶.超超临界锅炉用SA-335P92钢的焊接工艺性能研究[J].焊接,2007(6):44-46. 被引量:7
  • 5ECISS/TC 29. DIN EN 10216-2 Seamless steel tubes for pressure purpose-technical delivery conditions[S]. Berlin : European Committee Standardization, 2007.
  • 6Yoshizawa M, Igarashi M, Moriguchi K, et al. Effect of precipitates on long-term creep deformation properties of P92 and P122 type advanced ferritie steels for USC power plants[J]. Materials Science and Engineering A, 2009, 510-511(C): 162-168.
  • 7Falata L, VyrostkovdaA, Homolovda V, et al. Creep deformation and failure of E911/E911 and P92/1792 similar weld-joints [J]. Engineering Failure Analysis, 2009, 16(7): 2114-2120.
  • 8VyrostKovoa A, Homolovoa V, Fechab J, et al. Phase evolution in P92 and E911 weld metals during ageing[J]. Materials Science and Engineering A, 2008, 480(1-2): 289-298.
  • 9Ennies P J, Zielinska LA, Czyrska F A. Influence of heat treatment on microstruetural parameters and mechanical properties of P92 steel[J]. Materials Science and Technology, 2000, 16(10): 1226-1232.
  • 10Ennis P J, Zielinska LA, Wachter O, et al. Microstructural stability and creep rupture strength of the martensitic steel P92 for advanced powerplant[J]. Acta Materialia, 1997, 45(12): 4901-4907.

共引文献31

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部