基于UG图形模板的渐开线花键轴滚轧轮参数化设计

Parametric Design of Rolling Wheel of Involute Spline Shaft Based on UG Graphical Templates

运用UG软件对渐开线花键轴滚轧轮进行参数化建模,通过花键轴的参数确定滚轧轮基本参数,将花键轴参数与滚轧轮三维模型关联起来。通过修改花键轴的键数、模数、压力角等参数,建立所需滚轧轮的三维模型,大大提高了设计效率以及设计思路的可重用性。

The authors used UG to parametric modeling the rolling wheel of involute spline shaft.The basic parameters of the rolling wheel were determined by the parameters of the spline shaft,then the spline shaft parameters were associated with the 3D model of the rolling wheel.By modifying the keys,modulus,pressure angle and other parameters of spline shaft,three-dimensional model of rolling wheel was obtained,which improves the design efficiency and reusability of design ideas greatly.