期刊文献+

PDC钻头磨损监测新方法研究 被引量:2

下载PDF
导出
摘要 该文通过结合机械比能理论和钻速方程提出了一种新的钻头磨损监测方法,该方法综合考虑了机械比能模型和钻速方程模型,能有效地确定钻头在井下的磨损状况。该文通过中石化国际工程有限公司在阿尔及利亚打钻的MKT-1井进行了钻头磨损分级的计算,计算结果与实测数据基本一致,证明该方法的科学性,对提高钻井效率具有一定的指导意义。
作者 周波 肖伟
出处 《科技创新导报》 2014年第31期12-12,14,共2页 Science and Technology Innovation Herald
  • 相关文献

参考文献4

二级参考文献19

  • 1樊顺利,郭学增.用比能法评判钻头[J].石油钻采工艺,1993,15(2):20-24. 被引量:15
  • 2张辉,高德利.钻头选型方法综述[J].石油钻采工艺,2005,27(4):1-5. 被引量:70
  • 3徐济银,王吉东,蒋杰.比能在钻头选型中的应用[J].钻采工艺,1996,19(6):86-89. 被引量:12
  • 4Pessier R C, Fear M J. Quantifying common drilling problems with mechanical specific energy and a bit-specific coefficient of sliding ffiction[R]. SPE 24584,1992.
  • 5Waughman R J,Kenner J V, Moore R A, et al. ReaPtime spe- cific energy monitoring reveals drilling inefficiency and en- hances the understanding of when to pull worn PDC bits[R]. SPE/IADC 74520,2002.
  • 6Rafatian N,Miska S, Ledgerwood Ⅲ L W, et al. Experimentalstudy of MSE of a single PDC cutter under simulated pressur ized conditions[R]. SPE/IADC 119302,2009.
  • 7Waughman R J,Kenner J V,Moore R A. Real-time specific en- ergy monitoring enhances the understanding of when to pull worn PDC bits[J]. SPE Drilling & Completion, 2003,18(1) : 59-67.
  • 8Teale R. The concept of specific energy in rock drilling[J]. In- ternational Journal of Rock Mechanics and Mining Sciences Geomechanics Abstracts, 1965,2 (1): 57-73.
  • 9Rabia H. Specific energy as a criterion for bit selection[J]. Journal of Petroleum Technology, 1985,37(7) : 1225-1229.
  • 10Pessier R C. Different shales dictate fundamentally different strategies in hydraulics, bit selection, and operating practices [R]. SPE 28322,1994.

共引文献50

同被引文献13

  • 1张辉,高德利.钻井岩性实时识别方法研究[J].石油钻采工艺,2005,27(1):13-15. 被引量:10
  • 2Rashidi B, Hareland G, Nygaard R. Real-time Drill Bit Wear Prediction By Combining Rock Energy And Drilling Strength Concepts[R].Spe 117109,2008.
  • 3Rashidi B, Hareland G, Tahmeen M, Et A1. Real-time Bit Wear Optimization Using The Intelligent Drilling Advisory Sys- tem [R].Spe 136006,2010.
  • 4Rashidi B, Hareland G. Wu Z. New Approach In Real-time Bit Wear Prediction[R].Spe 136008,2010.
  • 5Liu Z, Marland C, Li D, Et A1. An Analytical Model CoupledWith Data Analytics to Estimate PDC Bit Wear[R].Spe 169451, 2014.
  • 6Gouda G M, Maestrami-eni M, Abu Saif M A, Et AI. A Real Mathematical Model to Compute The PDC Cutter Wear Value to Terminate PDC Bit Run[R].Spe 140151,2011.
  • 7Waughman R J, Kenner J V, Moore R A. Real-time Specific Energy Monitoring Reveals Drilling Inefficiency and Enhanc- es The Understanding Of When to Pull Worn PDC Bits[R]. SPE/IADC 74520,2002.
  • 8詹俊峰,高德利,刘希圣.地层抗钻强度与钻头磨损实用评估方法[J].石油钻采工艺,1997,19(6):16-23. 被引量:4
  • 9高德利,张辉,王家祥.地层岩性与钻头工况的评估方法研究及其应用[J].石油钻采工艺,1998,20(1):8-11. 被引量:6
  • 10李广,郭辛阳,李娟.提高钻速新技术研究进展[J].钻采工艺,2010,33(6):31-35. 被引量:10

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部