期刊文献+

7.5MeV电子束转轫致辐射的理论研究初探 被引量:1

Theoretical Study on Bremsstrahlung Transferred From Electron Beam of 7.5 MeV
下载PDF
导出
摘要 为研究电子束转轫致辐射的特性,采用FLUKA蒙特卡罗程序,研究了7.5 Me V电子束透过Cu、Ag、W、Ta、Water靶的电子、轫致辐射光子的特性,得到了利用轫致辐射进行辐照时的最佳靶厚度,以及在最佳靶厚度情况下的透射轫致辐射的能量密度分布。同时对不同束流扫宽情况下的能量利用率进行了初步探讨。本研究对7.5 Me V电子束转轫致辐射的靶设计及其辐射加工产业具有一定的理论指导意义。 The FLUKA Monte Carlo code was used for studying the bremsstrahlung emitted from various targets shot by7. 5 Me V electron beams. The simulation results show that efficiency of transmission photon and electrons,photon flux distribution and energy distribution of bremsstrahlung were related to material and thickness of the targets. For different beam sweep width,the energy utilization rate was estimated. The result has a certain guiding significance for target design of bremsstrahlung transferred from 7. 5 Me V electrons beams and optimization of irradiation facility.
出处 《核农学报》 CAS CSCD 北大核心 2015年第1期113-118,共6页 Journal of Nuclear Agricultural Sciences
基金 公益性行业(农业)科研专项经费(201103007) 国家高技术研究发展计划项目("863"计划)(2011AA100804) 上海市农口系统青年人才成长计划(2014)第1-3号
关键词 FLUKA 蒙特卡罗 轫致辐射 电子束 FLUKA Monte carlo bremsstrahlung electron beam
  • 相关文献

参考文献25

  • 1哈益明,施惠栋,王锋,刘志弢,谢宗传.电子束食品辐照的研究现状与应用特点[J].核农学报,2007,21(1):61-64. 被引量:85
  • 2孔秋莲,陈志军,岳玲,徐钦,张华,袁忠谊,戚文元.一种医用消毒擦片的辐照灭菌剂量确定[J].核农学报,2009,23(2):285-289. 被引量:1
  • 3Food and Agriculture Organization of the United Nations. CODEX STAN 106 -1983, REV. 1 - 2003. General Standard For Irradiated Foods[SJ. Rome Italy: FAO, 2003.
  • 4;Office of the Federal Register National Archives and Records Administration. Code of Federal Regulations, Vol 3 ,Chapter 1 .Parts 179, Irradiation in the production, Processing and handling of food[M]. Washington: U. S. Government printing office, 2004.
  • 5ISO. ISO 11137 - 1 - 2013, Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices[S] . Geneva Swiss: ISO/TC 198, 2013.
  • 6龙继东,石金水,禹海军,林郁正.厚靶轫致辐射特性的数值模拟研究[J].高能物理与核物理,2004,28(11):1238-1243. 被引量:6
  • 7李进玺,吴伟,来定国,程引会,马良,赵墨,郭景海,周辉.电子束与复合靶作用后辐射特性的数值模拟[J].原子能科学技术,2014,48(3):506-511. 被引量:7
  • 8Gregoire 0, Cleland M R, MittendorferJ, Dababneh S, Ehlermann D A E, Fan X, K. appeler F, LogarJ, MeissnerJ. , Mullier B, Stichelbaut F, Thayer D W. Radiological safety of food irradiation with high energy X - ray: theoretical expectations and experimental evidence[J]. Radiation Dhysics and Chemistry, 2003,67(2) :169 - 183.
  • 9Petwal V C, Bapna S C, Sandha R S, Kotaiah S, Subbaiah K V. Bremsstrahlung converter for high power EB radiation processing facility[CJ II Raja Ramanna Centre for Advanced Technology. Proceedings of the 4th Asian Particle Accelerator Conference. Indore: Raja Ramanna Centre for Advanced Technology, 2007: 767 -769.
  • 10Ferrari A, Sala P R, Fasso" A, RanftJ. FLUKA: a multi - particle transport code[RJ. United States: Stanford Linear Accelerator Center (SLAC) ,2005: SLAC - R -773.

二级参考文献65

共引文献104

同被引文献28

  • 1刘志弢,张化一,唐华平.电子辐照灭菌中剂量深度分布的分析[J].清华大学学报(自然科学版),2005,45(6):806-809. 被引量:3
  • 2宋廷善.电子束辐射交联技术的应用[J].橡塑资源利用,2005(6):19-22. 被引量:7
  • 3唐鄂生,袁勤良.工业电子辐照加工及加速器性能检测[J].原子能科学技术,2006,40(B09):156-160. 被引量:4
  • 4陈志军,戚文元,吴富兰,张华,沈杰,陆智新,袁忠谊.ESS-010-03电子直线加速器的结构及其几种性能指标测试方法[J].核农学报,2007,21(1):56-60. 被引量:3
  • 5哈益明,施惠栋,王锋,刘志弢,谢宗传.电子束食品辐照的研究现状与应用特点[J].核农学报,2007,21(1):61-64. 被引量:85
  • 6Marshall C, Richard G, Frederic G, Mikael L. The use of dose and charge distributions in electron beam processing [ J ]. Radiation Physics and Chemistry, 12th International Meeting on Radiation Processing (IMRP - 12) 2002, 63 (3/4/5/6) :729 -733.
  • 7Benny P G, Khader S A, Sarma K S S. Double-sided irradiation on homogenous products of different densities at an industrial EB accelerator of 2MeV energy [ J]. Nuclear Instruments and Methods in Physics Research A, 2015, 774:25-28.
  • 8李民熙,郭彦斌,孙裕国,李兆先,俞章华,施惠栋,何小海,李国青,陈勇,朱希恺,赖启基,黄正新.GB/T25306-2010辐射加工用电子加速器工程通用规范[S].北京:中国标准出版社.2011.
  • 9张彦立,张辉,龚晓明,刘智绵,夏渲.GB/T16841-2008能量为300keV-25MeV电子束辐射加工装置剂量学导则[S].北京:中国标准出版社,2009.
  • 10路敦柱,刘树德,傅世樒.y辐射源与电子束在辐射加工技术中的比较[J].辐射加工,2006,54(1):28-34.

引证文献1

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部