期刊文献+

汽车弹簧用钢疲劳破坏行为及显微组织分析 被引量:1

Fatigue Failure Behavior and Microstructure of Steel used in Auto Spring
下载PDF
导出
摘要 研究了汽车弹簧用钢疲劳破坏行为和显微组织。结果表明,试样表层的碳氮化钛、碳氮化钒等非金属夹杂物是引起试样疲劳破坏的主要原因,且试样表现为典型的"鱼眼"断裂。 The fatigue failure behavior and microstructure of the steel used in auto spring were investigated. The results show that the fatigue failure of the sample is mainly caused by the superficial non-metallic inclusions such as titanium carbonitride and vanadium carbnitride, and the sample presents a typical "fish-eye type" fractures.
作者 李磊 黄樱
出处 《铸造技术》 CAS 北大核心 2015年第1期20-21,共2页 Foundry Technology
关键词 汽车弹簧用钢 疲劳破坏 显微组织 steel used in auto spring fatigue failure microstructure
  • 引文网络
  • 相关文献

参考文献4

二级参考文献26

  • 1聂义宏,付书红,惠卫军,傅万堂,刘中华.硼对高强度弹簧钢脱碳敏感性的影响[J].钢铁研究学报,2005,17(4):45-50. 被引量:16
  • 2李英,聂爱诚,吴小林,赵晗.淬回火工艺对弹簧钢60Si2CrVAT力学性能的影响[J].特殊钢,2006,27(4):61-62. 被引量:12
  • 3张春红,黄平惠,田巧丽.60Si2CrVAT弹簧钢的生产实践[J].中国冶金,2006,16(7):13-15. 被引量:12
  • 4张建军,李玉明,张延光.汽车用弹簧钢的现状及发展[J].冶金标准化与质量,1997(5):37-40. 被引量:2
  • 5[1]Jang-Chul Shin,et al.Correlation of microstructure and fatigue properties of two high-strength spring steels[J].International Journal of Fatigue,1999,21:571-579.
  • 6[5]Lee C S ,et al.Microstructure influence on fatigue properties of a high-strength spring steel[J].Materials Science and Engineer,1998,A241: 30-37.
  • 7Ardehali Barani A, Li F, Romano P, et al. Design of high-strength steels by microalloying and thermomechanical treatment [J]. Materials Science and Engineering,2007,A463: 138-146.
  • 8安运铮.热处理工艺学[M].北京:机械工业出版社,1982..
  • 9雍岐龙 马鸣图 吴宝榕.微合金钢物理和力学冶金[M].北京:机械工业出版社,1989.197.
  • 10高慧菊 刘攀 艾家和 等.提速铁路用新型弹簧钢的热处理制度研究.钢铁,2004,39(10):68-68.

共引文献34

同被引文献2

引证文献1

二级引证文献4

;
使用帮助 返回顶部