摘要
根据隧道行车视觉特点,在参考CIE《公路隧道和地道照明指南》的基础上,分析比较了《公路隧道照明细则》(以下简称细则)和《公路隧道通风照明设计规范》(以下简称规范)在隧道照明区段和照明参数设置上的不同。结合具体的隧道采用《细则》方法进行照明优化设计,将设计所得结果与根据原《规范》所得结果比较。结果表明:利用《细则》方法进行隧道照明设计,与原《规范》相比,每个照明区段的照明能耗都有不同程度降低,对于一般长隧道,总体节能可在原《规范》基础上减少40%。
According to the visual characteristic of tunnel driving, Guidelines for Design of Lighting of Highway Tunnel and Specifications for Design of Ventilation and Lighting of Highway Tunnel are compared, based on the reference to the Guide for the Lighting of Road Tunnels and Underpasses which is proposed by CIE.The comparisons and analysis are focused on the division of lighting zones and setting of indicators.By optimized lighting design for a specific tunnel with Guidelines, the energy consumption of each lighting zone can be reduced at different levels compared with that deduced by Specifications.And for general long tunnel, the total energy-saving can reach to 40%compared to Speifications.
出处
《照明工程学报》
2015年第1期50-54,共5页
China Illuminating Engineering Journal
基金
交通运输部科技成果推广项目(2013316350070)
陕西省交通厅科技项目(13-29K)
贵州省交通厅科技项目(2014-122-020)
关键词
隧道照明
暗适应
明适应
节能设计
tunnel lighting
light adaptation
dark adaptation
energy-saving design
guidelines
