摘要
为确定某矿床钼矿石较合理的选矿工艺流程和选矿技术指标,开展了本次可选性试验研究。试验采用钼硫混合浮选—钼硫混合精矿再磨后钼硫分离的选别工艺流程,最终取得了钼精矿钼品位45.22%、钼回收率82.54%较为理想的试验指标。
In order to determine the reasonable process flowsheet and technical indexes of the molybdenum ore of a molybdenum deposit,mineral processing tests were carried out. The flowsheet of bulk flotation of molybdenum and sulphur,regrinding and separation of Mo-S bulk concentrate was adopted,finally molybdenum concentrate grading 45.22% Mo was obtained at recovery of 82.54% Mo,good flotation results were obtained.
出处
《有色金属（选矿部分）》
CAS
北大核心
2014年第4期36-39,共4页
Nonferrous Metals（Mineral Processing Section）
关键词
钼矿石
混合浮选
钼硫分离
molybdenum ore
bulk flotation
separation of molybdenum and sulphur
