期刊文献+

Mg-3Li-1Ce合金的组织与力学性能

Microstructure and Mechanical Properties of Mg-3Li-1Ce Alloy
下载PDF
导出
摘要 通过微合金化法制备了Mg-3Li-1Ce合金,研究轧制态和不同退火态下合金的微观组织和力学性能。结果表明,Mg-3Li-1Ce合金中弥散分布在晶粒内部的点状或者球状析出相为Mg12Ce相。经350℃退火1 h后,合金具有良好的强度与塑性。 The microstructure and mechanical properties of Mg-3Li-lCe alloy, which were prepared by microalloying method, with different annealing states were studied. The results show that the point like or spherical precipitates in the grai n of Mg-3Li-lCe alloy is Mgl:Ce phase. The: alloy has good combination of strength and plasticity after annealed at 350℃ forlh.
作者 马瑞华
出处 《铸造技术》 CAS 北大核心 2015年第2期299-302,共4页 Foundry Technology
关键词 Mg-3Li-1Ce合金 轧态 退火态 微观组织 Mg-3Li-lCe alloy hot rolling state annealing state microstructure
  • 相关文献

参考文献5

二级参考文献62

  • 1张诗昌,魏伯康,蔡启舟,王立世.Effect of mischmetal and yttrium on microstructures and mechanical properties of Mg-Al alloy[J].中国有色金属学会会刊:英文版,2003,13(1):83-87. 被引量:16
  • 2余琨,黎文献,张世军.Ce对镁及镁合金中晶粒的细化机理[J].稀有金属材料与工程,2005,34(7):1013-1016. 被引量:73
  • 3金军兵,王智祥,刘雪峰,谢建新.均匀化处理对AZ91镁合金组织和力学性能的影响[J].金属学报,2006,42(10):1014-1018. 被引量:51
  • 4[1]Mordike B L, Ebert T. Magnesium properties-application-potential[J]. Mater Sci Eng A, 2001, 302:37 -45.
  • 5[3]Regev M, Botstein O, Bamberger M, et al. Continuous versus interrupted creep in AZ91D magnesium alloy[J]. Mater Sci Eng A, 2001, 302: 51- 55.
  • 6[4]Luo A, Pekguleryuz M O. Review cast magnesium alloys for elevated temperature applications[J]. Journal of Materials Science, 1994, 29: 5259- 5271.
  • 7[7]YUAN Guang-yin, SUN Yang-shan, DING Wenjiang. Effects of bismuth and antimony additions on the microstructure and mechanical properties of AZ91 magnesium alloy[J]. Mater Sci Eng A, 2001, 308:38 - 44 .
  • 8[8]LU Yi-zhen, WANG Qu-dong, ZENG Xiao-qin, et al.Effects of rare earths on the microstructure, properties and fracture behavior of Mg-Al alloys[J]. Mater Sci Eng A, 2000, 278 : 66-76.
  • 9[9]Yuan G Y, Liu Z L, Wang Q D, et al. Microstructure refinement of Mg-Al-Zn-Si alloys[J]. Materials Letters, 2002, 56: 53-58.
  • 10[10]Anyanwu I A, Gokan Y, Nozawa S, et al. Heat resistant magnesium alloys for automotive powertrain applications[J]. Mater Sci Forum, 2003, 419- 422:445 - 450.

共引文献119

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部