智能照明控制系统的设计

Design of intelligent lighting control system

以AT89S52为控制器,使用红外传感器以及光电传感器进行信号的采集,用单片机进行控制灯具的通断,设计了一种教室智能照明控制系统。由现实的状况来得出需要设计一种能够节能的教室智能控制系统,然后介绍了教室智能控制系统的实现的总体设计,并从软件以及硬件两个角度分别介绍了本次设计的具体方法、步骤以及设备的调试情况。通过进行理论分析以及调试,这次设计所做的智能照明系统能够实现检测照度,检测室内是否有人,之后能够做出智能选择,能够达到最初要求的实现节能的目的,设计使用的器件均是实验室、市场常见的,使用简单,方便,并且价格适中的器件,这在另一种层面上也做到了一种节能。

Choosing AT89S52 as the controller, using infrared sensor and photoelectric sensor for signal collection, u- sing single-chip microcomputer to control the on-off of lamps and lanterns, a classroom intelligent lighting control sys- tem is designed. The overall design is introduced, including the specific methods and steps of this design as well as the debugging of the equipment respectively from the software and hardware. Through theoretical analysis and debug- ging, the design is verified that can realize the detection of illuminance, find if someone is in the classroom, make smart choices. The devices used in the design are common in laboratory or market, which are convenient to operation and have reasonable prices.