期刊文献+

CB/CNTs/SSBR与SiO_2/CNTs/SSBR复合材料的基本性能研究 被引量:5

Study on performance of CB/CNTs/SSBR and SiO_2/CNTs/SSBR composites
下载PDF
导出
摘要 研究了碳纳米管(CNTs)用量对炭黑(CB)/CNTs/溶聚丁苯橡胶(SSBR)和SiO2/CNTs/SSBR力学性能、导电、导热性能和动态性能的影响。结果表明,随着CNTs用量的增加,胶料的正硫化时间和焦烧时间缩短,硫化速率提高,硫化胶的力学性能、导热及导电性能明显改善;当CNTs用量相同时,CB/CNTs/SSBR的综合性能要优于SiO2/CNTs/SSBR,但是当CNTs用量超过6份时,二者之间的性能差别较小,SiO2/CNTs/SSBR的部分性能如拉伸强度、300%定伸应力甚至优于CB/CNTs/SSBR。CNTs的最佳用量为6份。 In this work, the influence of the amount of CNTs on mechanical property, thermal con- ductivity, electrical conductivity and dynamic property of CB/CNTs/SSBR and SiO_2/CNTs/SSBR composites was studied. The results illustrated that, with the increase of the content of CNTs, the op- timum cure time and the scorch time of SSBR compounds decrease, and the curing rate increases; meanwhile,the mechanical property, thermal conductivity and electrical conductivity of both CB/ CNTs/SSBR and SiO_2/CNTs/SSBR composites are improved. When the addition level of CNTs keeps constant, the combination property of CB/CNTs/SSBR is better than that of SiO2/CNTs/SSBR. How ever,the properties of the two composites become similar when the mass fraction of CNTs is more than 6 phr,some properties of SiO_2/CNTs/SSBR,sueh as tensile strength,modulus at 100% ,are even better than that of CB/CNTs/SSBR. The best addition level of CNTs is 6 phr.
出处 《弹性体》 CAS 2015年第1期58-62,共5页 China Elastomerics
关键词 溶聚丁苯橡胶 白炭黑 炭黑 碳纳米管 solution styrene-butadiene rubber(SSBR) SiO_2 carbon black(CB) carbon nanotubes(CNTs)
  • 相关文献

参考文献8

  • 1Lijima S. Helical mierotubules of graphitic carbon[J]. Na- ture, 1991,354 : 56-58.
  • 2Ajayan P M, Stephan O, Colliex C, et al. Aligned carbon nanotube arrays formed by cutting a polymer resin--nano- tube composite[J]. Science, 1994,265 :1212-1214.
  • 3魏飞,张强,骞伟中,徐光辉,项荣,温倩,王垚,罗国华.碳纳米管阵列研究进展[J].新型炭材料,2007,22(3):271-282. 被引量:18
  • 4Wang M J. Effect of polymer filler and filler-filler interac- tions on dynamic properties of filled vulcanizates[J]. Rubber Chemistry and Technology, 1998,71 (3) : 520-589.
  • 5Byers J T. Fillers for balancing passenger tire tread proper- ties[J ]. Rubber Chemistry and Technology, 2002,75 (3) 527-548.
  • 6张士齐,贾红兵,刘卫东.填料-橡胶的化学和物理作用及其对补强的影响[J].橡胶工业,2003,50(4):201-204. 被引量:21
  • 7Lu L, Zhai Y, Zhang Y, et al. Reinforcement of hydrogena- ted carboxylated nitrile-butadiene rubber by multi-walled carbon nanotubes [J]. Applied Surface Science, 2008, 255 (5) :2162-2166.
  • 8Drozdov A D,Dorfmann A L. The payne effect for particle- reinforced elastomers[J]. Polymer Engineering & Science, 2002,42(3) :591-604.

二级参考文献93

  • 1李仲,英哲,刘敏,成会明.熔融纺丝方法制备纳米碳管/聚丙烯复合纤维及其拉伸性能(英文)[J].新型炭材料,2005,20(2):108-114. 被引量:9
  • 2吴锋,徐斌.碳纳米管在超级电容器中的应用研究进展[J].新型炭材料,2006,21(2):176-184. 被引量:31
  • 3张群峰,余皓,罗国华,骞伟中,魏飞.流化床CVD法制备单壁碳纳米管:反应温度与时间的影响[J].新型炭材料,2006,21(4):349-354. 被引量:2
  • 4刘卫东.硫化胶力学性能、形态及其微观结构的研究[D].南京:南京理工大学,1994.
  • 5Baughuman R H,Zakhidov A A,de Heer W A.Carbon nanotubes-the route toward applications[J].Science,2002,297(5582):787-792.
  • 6Wang Y,Wei F,Luo G H,et al.The large-scale production of carbon nanotubes in a nano-agglomerate fiuidized-bed reactor[J].Chemical Physics Letters,2002,364(5-6):568-572.
  • 7Ajayan P M,Stephan O,Collex C,et al.Aligned carbon nanotube arrays formed by cutting a polymer resin-nanotube composite[J].Science,1994,265(5176):1212-1214.
  • 8de Heer W A,Bacsa W S,Chatelain A,et al.Aligned carbon nanotube films:production and optical and electronic properties[J].Science,1995,268(5212):845-847.
  • 9Walters D A,Casavant M J,Qin X C,et al.In-plane-aligned membranes of carbon nanotubes[J].Chemical Physics Letters,2001,338:14-20.
  • 10Rao S G,Huang L,Setyawan W,et al.Large-scale assembly of carbon nanotubes[J].Nature,2003,425:36-37.

共引文献37

同被引文献47

引证文献5

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部