摘要
目的根据瓦楞辊的工作环境和运动特点,研究在不同驱动函数下瓦楞辊的运行情况。方法首先运用实体建模软件Pro/E创建瓦楞辊的三维实体模型,然后使用虚拟样机分析软件ADAMS对瓦楞辊的工作过程进行运动学仿真和分析。结果得到了2种驱动函数下瓦楞辊的角速度和角加速度曲线,并将结果进行了对比和分析。结论 STEP函数为最适宜的驱动函数,为改善瓦楞辊的运动平稳性提供了理论帮助,并为后期的动力学分析打下了基础。
The aim of this study was to investigate the running status of Corrugated Roller under different driving functions according to the characteristics of the movement and the working conditions of the Corrugated Roller. The 3D solid model of Corrugated Roller was built using the Pro/E modeling software, and then kinematics simulation and analysis of the working process of Corrugated Roller were conducted applying the virtual prototyping analysis software ADAMS.Angular velocity curves and angular acceleration curves of Corrugated Roller under two driving functions were obtained.And the results were compared and analyzed. The STEP function was a more appropriate driving function, which provided theoretical help for improving the smoothness of the movement of Corrugated Roller, and laid a foundation for later dynamic analysis.
出处
《包装工程》
CAS
CSCD
北大核心
2015年第5期79-81,104,共4页
Packaging Engineering
关键词
瓦楞辊
运动学分析
仿真
corrugated roller
kinematics analysis
simulation