摘要
分析了30油分底模基体的铸造工艺性,设计了铸件的铸造工艺,使用铸造数值模拟软件AnyCasting模拟了铸件的充型和凝固过程.通过对模拟结果的综合分析,确定了铸件的浇注系统,改进了冷铁与冒口补缩的配合设置,最终得到满足生产要求的最优工艺方案.
The casting usability of 30 oil bottom mold base was analyzed, and its casting process was designed. The filling and solidification process of castings were simulated by AnyCasting. Based on a comprehensive analysis of simulation results, the gating system is determined, the feeding system is improved, and ultimately the best technology solution is got to satisfy the production requirements.
出处
《铸造工程》
2015年第2期21-25,共5页
Foundry Engineering
关键词
铸造工艺
数值模拟
浇注系统
补缩系统
casting process
numerical simulation
gating system
feeding system
