期刊文献+

Effect of Zr-Ti combined deoxidation on impact toughness of coarse-grained heat-affected zone with high heat input welding

Effect of Zr-Ti combined deoxidation on impact toughness of coarse-grained heat-affected zone with high heat input welding
下载PDF
导出
摘要 In this study, the effects of Zr-Ti combined deoxidation and AI deoxidation on the impact toughness of coarse- grained heat-affected zone in high-strength low-alloy steels were investigated. More fine oxides were formed in the Zr-Ti-killed steel than in Al-killed steel. It was also found that more acicular ferrite grains were formed in the coarse-grained heat-affected zone in the Zr-Ti-killed steel than in Al-killed steel. The impact toughness of coarse-grained heat-affected zone of Zr-Ti-kiUed steel was higher than that of Al-killed steel. The good impact toughness was attributable to the pinning effect of fine oxides and the formation of acicular ferrite grains on fine oxides. In this study, the effects of Zr-Ti combined deoxidation and AI deoxidation on the impact toughness of coarse- grained heat-affected zone in high-strength low-alloy steels were investigated. More fine oxides were formed in the Zr-Ti-killed steel than in Al-killed steel. It was also found that more acicular ferrite grains were formed in the coarse-grained heat-affected zone in the Zr-Ti-killed steel than in Al-killed steel. The impact toughness of coarse-grained heat-affected zone of Zr-Ti-kiUed steel was higher than that of Al-killed steel. The good impact toughness was attributable to the pinning effect of fine oxides and the formation of acicular ferrite grains on fine oxides.
出处 《China Welding》 EI CAS 2014年第4期56-62,共7页 中国焊接(英文版)
基金 This work was supported by the China Postdoctoral Science Foundation C Grant No. 2014M550414 ) and the National Natural Science Foundation of China ( Grant No. 51401152).
关键词 STEELS heat-affected zone high heat input welding TOUGHNESS DEOXIDATION steels, heat-affected zone, high heat input welding, toughness, deoxidation
  • 相关文献

参考文献2

二级参考文献10

  • 1H.Homma,S.Okita,S.Matsuda,and K.Yamamoto. Welding Journal . 1987
  • 2S.Mizoguchi. The Fourth Workshop on High Performance Steel . 2002
  • 3G.M.Evans. Weld.Res . 1995
  • 4T.Yukio,S.Naoki,and T.Takeshi. Iron and Steel Institute of Japan . 1994
  • 5J.H.Shim,Y.W.Cho,and S.H.Chung. Acta Materialia . 1999
  • 6S.Takashi,W.Masamitsu,and U.Yoshiyuki. Iron and Steel Institute of Japan . 1992
  • 7A.B.Fox,M.E.Valdez,and J.Gisby. Iron and Steel Institute of Japan . 2004
  • 8J.S.Yun,J.H.Shim,and Y.W.Cho. Acta Materialia . 2003
  • 9K.S.Oh. The Fourth Workshop on High Performance Steel . 2002
  • 10J.L.Lee. Acta Materialia . 1994

共引文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部