摘要
系统研究了火试金重量法直接测定铅精矿、铅矿石、铅合金和含铅物料中银含量的条件,将测定结果与国家标准、行业标准方法的测定结果进行比较,并采用铅精矿国家标准物质进行验证.结果表明:测定5~71 200 g/t的银含量,相对标准偏差(RSD)和银标准加标回收率分别为0.10%~7.4%和99.10%~99.94%.分析结果与国家标准、行业标准方法测定结果吻合,验证结果与铅精矿国家标准物质认定值一致.
In this paper, analytical conditions for direct determination of silver in lead concentrates, lead ore, lead alloys and lead-contained materiels by fire assay gravimetry were systemic investigated. Comparisons of experimental data between the proposed method and the national standards and industrial standards were carried out. The reliability of the method has been validated by determination of Ag in national standard reference of lead concentrate. The results indicated that the linear ranges, relative standard deviation(RSD, n =11) and recoveries e were 5~71 200 g/t, 0.10~7.4% and 99.10%~ 99.94%, respectively. The found values were in good accord with certified values.
出处
《中国无机分析化学》
CAS
2015年第1期19-23,共5页
Chinese Journal of Inorganic Analytical Chemistry
关键词
火试金重量法
铅精矿
铅矿石
铅合金
含铅物料
银
fire assay gravimetry
lead concentrate
lead ore
lead alloys
lead-contained materiels
silver