摘要
探讨了利用超细涂料对纯棉毛巾织物涂料印花的工艺.对超细涂料印花的焙烘温度和时间,粘合剂用量等因素进行了单因素和正交实验的研究,结果发现粘合剂对摩擦牢度的影响最大,最佳印花工艺条件为粘合剂10%,焙烘150℃×3min.对比普通涂料与超细涂料印花效果发现,超细涂料印花织物的颜色深度大于普通涂料,具有更鲜艳的颜色和更纯正的色光,牢度和手感均好于普通涂料.
In this paper, the coating printing of cotton towel by using ultrafine-pigments is discussed. The influence of baking condition （temperature and time） and dosage of binder on the properties of printed cotton towel is investigated by the single factor and orthogonal experiment methods. The results show that the dosage of binder has significant effect on the rubber color fastness. The optimal printing procedure is 20% binder in the color paste and baking at 150℃ for 3rain. Compared with the conventional pigment, the ultra-fine pigment has higher K/S value, brighter and purer chrominance, better color fastness and handle.
出处
《湖南工程学院学报（自然科学版）》
2015年第1期48-52,共5页
Journal of Hunan Institute of Engineering(Natural Science Edition)
基金
湖南省高校科技成果产业化培育项目(11CY006
11CY007)
湖南省科技计划项目(2014FJ2013)
关键词
纯棉毛巾织物
超细涂料
印花
色牢度
cotton towel
ultrafine pigment
printing
color fastness
