摘要
运用有限元分析软件ANSYS建立了20Mn Si连铸方坯电磁-热耦合分析的有限元模型,在不同的加热参数下对20Mn Si连铸方坯加热过程的温度分布进行了模拟计算,获得了不同加热参数下连铸坯的温度场分布,分析了不同参数对加热效果的影响。最后,对模拟结果进行了验证,模拟结果与实测结果吻合良好。
The FEA model of electromagnetic-thermal coupled field was built on 20MnSi continuous casting square billet by using ANSYS soRware. The distribution of temperature was obtained by simulation calculation under different induction heating parameters. In addition, the influence of parameters on the result of induction heating was analysed. Finally, simulation results are verified and the results show that simulation results are in good agreement with the measured results.
出处
《热加工工艺》
CSCD
北大核心
2015年第5期72-75,78,共5页
Hot Working Technology
关键词
ANSYS
感应加热
数值模拟
连铸方坯
ANSYS
induction heating
numerical simulation
continuous casting square billet
