期刊文献+

水下连接器密封性能分析及实验研究 被引量:23

Analysis and experimental study of subsea connector's seal performance
下载PDF
导出
摘要 针对水下连接器需要具有良好可靠性的问题,对连接器的密封性能进行了研究。通过对卡爪式连接器的密封圈进行弹性力学分析,用数学模型揭示了金属密封机理,并根据其受力形式计算了密封比压;根据密封比压公式对密封圈密封面的角度进行了改进,提出了一种新型复合式内外压密封结构。经过有限元仿真分析及样机试验研究,验证了新型密封圈所需的预紧力载荷只有82 t,比原始的标准透镜式密封圈预紧力载荷小了将近30 t,证明了新型复合式内外压密封结构的优越性。 The seal performance of subsea connectors was analyzed in order to meet the challenges and solve the difficulties of ensuring the good reliability of the connectors. The elastic analysis of the claw type connector seals was carried out,the mechanism of metal seal was revealed by a mathematical model and the seal specific pressure was calculated according to the form of its stress. The seal angle was improved based on the seal specific pressure formula. A new combined seal structure which can withstand internal and external pressure was made. The results of finite element analysis and the experiments with prototype showed that the preload of the new lens-seal is only 82 t and it is almost 30 t less than the standard lens-seal,which proves the superiority of the new combined structure.
出处 《哈尔滨工程大学学报》 EI CAS CSCD 北大核心 2015年第3期389-393,共5页 Journal of Harbin Engineering University
基金 国家863计划资助项目(2013AA09A217) 国家自然科学基金资助项目(51105088) 海洋石油总公司基金资助项目(CNOOC-KJ125ZDXM05GC00GC2011-02) 国家科技重大专项基金资助项目(2011ZX05027-004)
关键词 连接器 弹性力学 透镜式密封 密封比压 密封性能 预紧力 connector elasticity lens-seal seal pressure seal performance pretightening force
  • 相关文献

参考文献12

二级参考文献26

  • 1温卫东,高德平.接触问题数值分析方法的研究现状与发展[J].南京航空航天大学学报,1994,26(5):664-675. 被引量:22
  • 2许可,庞贺伟,孙刚.卫星推进系统管路装配技术研究[J].航天器环境工程,2006,23(6):363-368. 被引量:3
  • 3F O Rathbun. Metal-to-metal and metal-gasketed seals [ C ]. The Aerospace Fluid Power System Equipment Conference, Los Angeles, 1965: 156-169.
  • 4Y Matsuzaki, T Kazamaki. Effect of surface roughness on compressive stress of static seals [ J ]. JSME International Journal Series Ⅲ, 1988, 31 (1) : 99 -106.
  • 5冯秀,顾伯勤,孙见君,魏龙.金属垫片密封机制研究[J].润滑与密封,2007,32(10):97-99. 被引量:29
  • 6MSSSP一65-1994用透镜垫的高压化工法兰和螺纹短管[S].
  • 7DIN2696-1999, l_enticular Ring Joint Gaskets for Flanged Joints[S ].
  • 8ASME Bl6.5-2OO9,Pipe Flanges and Flanged Fittings NPS 1/2 through NPS 24 Metric/Inch Standard[S].
  • 9API 6A-2004,Specification for Wellhead and Christmas Tree Equipment [S].
  • 10i ASME Boiler & Pressure Vessel Code VIII Division 2-2007,Rules for Construction of Pressure Vessels[ S ].

共引文献88

同被引文献106

引证文献23

二级引证文献73

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部