摘要
调度集中系统(CTC)作为高速铁路行车指挥系统,在车站需要与TCC接口,列控中心增加区间占用逻辑检查功能后,CTC系统与之相关的接口协议、用户界面、操作流程等方面均随之发生变化,因此需要对有关问题进行研究,为列控中心区间占用逻辑检查功能大范围推广应用提供借鉴和参考。
As the high-speed railway operation command system,centralized traffic control system(CTC)needs connect with the TCC in the station.After adding the section occupancy logic check function in TCC,the CTC system with it aspects and so on correlation connection protocol,user interface,operation flow changes along with it.Therefore,adding the section occupancy logic check function in TCC,it is necessary to study protocol between CTC and TCC and the user interface of CTC and operation procedure and trial application introduction.This study can supply some reference and guidance for wide spread application in future.
出处
《铁道通信信号》
2015年第3期69-72,共4页
Railway Signalling & Communication