摘要
为了克服在切削加工过程中单一的控制策略建立的控制系统性能不理想的情况,采用了多个系统并联的切削加工过程模型。结合了PID控制和模糊控制两者各自的优点,设计实现了对切削加工过程的双模控制。利用MATLAB对该控制策略进行响应仿真并调试参数,求解出了较优的基于PID控制与模糊控制的切削加工过程双模控制的控制器,有效地提升了对切削加工系统的控制性能。
In order to overcome the poor performance of the control systems established by single control strategy in the cutting process,a cutting process model of multiple systems in parallel was adopted.A dual-mode controller was designed based on combining the advantages PID control and fuzzy control.MATLAB software was used to simulate the system response of the control strategy and to optimize the parameters.An optimum cutting process controller of the dualmode control strategy is obtained and the control performance of the system is effectively enhanced.
出处
《轻工机械》
CAS
2015年第2期61-64,共4页
Light Industry Machinery
