期刊文献+

粒度小于13.2mm矿石颗粒的冲击粉碎试验研究 被引量:1

EXPERIMENTAL STUDY ON IMPACT CRUSHING OF PARTICLES SMALLER THAN 13. 2 mm
下载PDF
导出
摘要 JK落重试验是测定矿石粉碎特性参数的一种方法。标准落重试验的试样粒度范围为-63.0+13.2 mm。在利用JKSim Met软件进行自磨/半自磨粉碎模拟时,由此试验获得的矿石特性参数被默认地运用于所有粒度颗粒的粉碎。以华东某金矿矿石为对象,进行了粒度小于13.2 mm矿石颗粒的冲击粉碎试验研究。结果表明,此矿石物料的粉碎存在粒度效应,随着粒度的减小,颗粒抵抗冲击粉碎的能力增大。另外还发现,试料制备时的破碎次数对颗粒的粉碎效果也有影响。 JK drop weight test is a method used for determining ore comminution parameters. The particle size range of the feed for the standard drop weight test is -63.0 + 13.2 mm. The material parameters obtained from the drop weight test is applied to particles of all size by default, when the software JKSimMet is used to simulate an au- togenous/semi-autogenous grinding process. In this study, experiments were conducted to investigate the impact crushing characteristics of particles smaller than 13.2 mm of a gold ore from eastern China. The results showed that a particle-size effect exists by impact crushing of this ore material, the anti-crushing ability of the particle under the impact condition increases as the particle size decreases. In addition it was found that the number of crushing stages by sample preparation has an influence on the result of the impact crushing.
作者 何毛 刘建远
出处 《矿冶》 CAS 2015年第2期5-10,共6页 Mining And Metallurgy
关键词 落重试验 自磨/半自磨 物料特性参数 冲击粉碎 粒度效应 drop weight test AG/SAG material characterization parameters impact crushing particle-sizeeffect
  • 相关文献

参考文献6

二级参考文献41

  • 1夏菊芳.半自磨工艺在我国矿山的应用现状[J].中国矿山工程,2004,33(5):37-39. 被引量:32
  • 2《选矿设计手册》编委会.选矿设计手册[M].北京:冶金工业出版社,1988..
  • 3中国有色工程设计研究总院.冬瓜山铜矿选矿厂初步设计[R].2002,4.
  • 4中国恩菲工程技术有限公司.冬瓜山铜矿石矿样球磨邦德球磨功指数测定报告[R].2007.7.
  • 5段希祥.碎块与磨矿[M].2版,北京:冶金工业出版社,2006.
  • 6Bond F C, Crushing and grinding calculations[ J], British Chemical Engineering, 1961,6 ~ 378 -385 ; 543 -548,.
  • 7《选矿手册》编委会.选矿手册:第二卷第二分册[M].北京:冶金工业出版社,1993.
  • 8《选矿手册》编委会.选矿手册:第二卷第一分册[M].北京:冶金工业出版社,1993.
  • 9Starkey J, Dobby G. Application of the SAG Power Indox at five Canadian SAG plants[ C ]//Presented to the International Conference on AG/SAG Technology, Vancouver, 1996,.
  • 10Starkey J, Getting more from drill core: preliminary SAC- design [ C ] ffPresented to the Randol Gold Forum, Monterey/Californla, 1997,.

共引文献55

同被引文献7

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部