期刊文献+

纤维增强C/SiC复合陶瓷材料小螺纹孔攻丝工艺研究

Study on Small Screw Hole Tapping Technology of Fiber Reinforced C/SiC Ceramic Composites
下载PDF
导出
摘要 针对C/SiC复合陶瓷材料加工过程中掉渣严重、螺牙成型困难、加工合格率较低等问题,通过大量的工艺试验,摸索出非金属材料小螺纹攻丝螺牙成型的变化规律,从工艺方案的确定、钻头材质的选择、丝锥材质的选择、丝锥攻丝受力等方面总结出在非金属纤维增强C/Si C陶瓷材料上的小螺纹孔攻丝的工艺加工方法。提高了非金属材料小螺纹孔攻丝的合格率。 Focusing on the problems of serious scaling-off, screw tooth forming difficulty, and low qualified rate in the machining process of C/Si C composite ceramics, massive experiments were conducted. Forming rules of small screw tooth of C/Si C composite ceramic material were found and processing technology of small screw hole tapping for the material was summarized from aspects of scheme, drill and tap material, and tap force. The qualified rate of small screw hole tapping of C/Si C composite ceramics was improved.
出处 《航天制造技术》 2015年第2期48-51,共4页 Aerospace Manufacturing Technology
关键词 C/SiC陶瓷材料 螺纹孔 攻丝 C/SiC ceramic materials thread hole tapping
  • 相关文献

参考文献2

二级参考文献19

  • 1王林山,熊翔,肖鹏,闫志巧,张红波,刘根山.高温热处理对C/C-SiC复合材料制备与力学性能的影响[J].新型炭材料,2005,20(3):245-249. 被引量:19
  • 2周长城,张长瑞,胡海峰,张玉娣.Cf/SiC复合材料制备工艺研究[J].材料导报,2007,21(2):148-150. 被引量:6
  • 3Cueva G,Sinatora A,Guesser W L,et al.Wear resistance of cast ironsused in brake discrotors[J].Wear,2003,255:1256-1260.
  • 4Cho M H,Kim S J,Basch R H,et al.Tribological study of gray cast iron with automotive brake linings:The effect of rotor microstructure[J].Tribology International,2003,36:537-545.
  • 5Breuer B,Dausend U.Advanced Brake Technology[M].USA:SAE International,2003,4:37-47.
  • 6YAO Ping-ping,SHENG Hong-chao,XIONG Xiang,et al.[J].Transactions of Nonferrous Metals Society of China,2007,17(1):99-103.
  • 7Blanco C,Bermejo J,Marsh H,et al.Chemical and physical properties of carbon as related to brake performance[J].Wear,1997,213:1-12.
  • 8Chen J D,Chern Lin J H,Ju C P.Effect of humidity on the frictional behavior of carbon-carbon composites[J].Wear,1996,193(1):38-47.
  • 9Krenkel W,Heidenreich B,Renz R.C/C-SiC composites for advanced friction systems[J].Advanced Engineering Materials,2002,4 (8):427-436.
  • 10Gadow R,Kienzle A.Processing and manufacturing of C-fibre reinforced SiC-composites for disk brakes[C] //Proc 6th Int Symp on Ceramic Mat and Components for Engines,Arita,Japan,1997:412-418.

共引文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部