Effect of Initial Geometry on Surface Flatness after Arc Welding Analyzed with MPS Method
Effect of Initial Geometry on Surface Flatness after Arc Welding Analyzed with MPS Method
参考文献9
-
1Ko, S. H., Choi, S. K., and Yoo, C. D. 2001. "Effects of Surface Depression on Pool Convection and Geometry in Stationary GTA W." Welding Journal 80 (2): 39-45.
-
2Ito, M., Izawa, S., Fukunishi, Y., and Shigeta, M. 2012. "SPH Simulation of Gas Arc Welding Process." Presented at the 7th International Conference on Computational Fluid Dynamics, Hawaii, USA.
-
3Kanemaru, S., Sasaki, T., Sato, T., Mishima, H., Tashiro, S., and Tanaka, M. 2012. "3D Numerical Analysis Model for TIG-MIG Welding Process." Quarterly of Japan Welding Society 30 (4): 306-12.
-
4Kong, K., Asserin, 0., Gounand, S., Gilles, P., Bergheau, J. M., and Medale, M. 2012. "3D Finite Element Simulation of TIG Weld Pool." Presented at the lOP (Institute of Physics) Conf. Series: Materials Science and Engineering, Madrid, Spain.
-
5Sreeraj, P., Kannan, T., and Maji, S. 2013. "Prediction and Control of Weld Bead Geometry in Gas Metal Arc Welding Process Using Simulated Annealing Algorithm." International Journal of Computational Engineering Research 33 (I): 213-22.
-
6Hirasawa, S., and Haneda, M. 2002. "Geometry Analysis in Arc Welding of Plates." In Proceedings of 12th International Heat Transfer Conference, 699-704.
-
7Koshizuka, S. 2005. Moving-Particle Semi-implicit Method. Tokyo: Maruzen Pub. Corporation.
-
8Ochi, N., Okawa, S., and Mochizuki, M. 2013. "Welding Process Simulation Using Hybrid Explicit MPS and Grid Method." Transaction of Japan Society for Computational Engineering and Science, Paper No. 20130005.
-
9Lamb, H. 1945. Hydrodynamics. UK: Cambridge Univ. Press.
-
1李红霞,宋克兴,张彦敏,国秀花.SPS法制备弥散强化铜基复合材料的组织和性能[J].热加工工艺,2013,42(24):1-5. 被引量:7
-
2罗亚涛,梁淑华,代卫丽,邹军涛.SPS烧结W-10Ti合金的组织和性能[J].稀有金属材料与工程,2015,44(9):2310-2313. 被引量:1
-
3伏晓国,汪小琳,郭焕军,王庆富,赵正平,钟永强.金属铀在氢氧化钠溶液中阳极氧化膜的XPS特性研究[J].核化学与放射化学,2002,24(2):65-69.
-
4谷川恭雄,森博嗣,黑川善幸.新拌混凝土流动与变形的模拟方法研究(英文)[J].济南大学学报(自然科学版),1998,14(S1):43-53. 被引量:7
-
5艾桃桃,费岩晗,冯小明,余宁,于琦,李文虎,袁新强.SPS法制备Ti_2AlC/TiAl基复合材料的力学性能[J].材料热处理学报,2016,37(8):20-24. 被引量:3
-
6王春圃,谢连俊,杨旭东,刘玉强,蔡华甦.激光瞬间作用后金属表层特性及机理研究[J].激光杂志,1988,9(3):135-140.
-
7徐建忠,魏宝明.XPS-法研究高温弱酸性介质中化学镀NiCuP非晶态合金的腐蚀行为[J].腐蚀科学与防护技术,2000,12(2):72-76. 被引量:5
-
8李学伟,孙福久,刘锦辉,周长海,田宏.选择性激光快速熔化TC4合金成形工艺及性能[J].黑龙江科技大学学报,2016,26(5):536-540. 被引量:5
-
9陈树辉,林文静,许光耀,黄建亮.索网结构静力分析的动态松驰法[J].应用力学学报,2002,19(2):34-37. 被引量:7
-
10安富强,李平,曲选辉,郑雪萍.一种改善La-Mg-Ni贮氢电极合金性能的方法[J].北京科技大学学报,2008,30(3):263-266. 被引量:6