期刊文献+

Beam multiplexing of diode laser arrays

Beam multiplexing of diode laser arrays
原文传递
导出
摘要 Design and experimental studies on the wavelength multiplexing and polarization multiplexing of diode laser arrays were carried out. First, the structure of a A1GalnAs/GaAs/AIGaAs quantum well under compressive strain was used because the characteristic of wavelength was easier to adjust. We obtained diode laser arrays lasing in five different wavelengths, about 760 nm, 800 nm, 860 nm, 930 nm, and 976 nm. At the same time, four edge filters were designed, and an experimental study on the beam multiplexing of diode laser arrays was carried out. Second, two beams with different polarization states were composited using a half wave plate and a polarizing beam-splitter prism. After that, the beam focusing system was designed. Ultimately, ten beams of diode laser arrays in five wavelengths and two polarization states were composited, the total output power was 196 W and the overall efficiency was 76%. The size of the output focus spot was 144 × 1330μm2, and the power density of the focused light was as high as 1.02 ×105 W/cm2. Compared with a single diode laser array, the power density of the composite beam was improved by 4.3 times. Design and experimental studies on the wavelength multiplexing and polarization multiplexing of diode laser arrays were carried out. First, the structure of a A1GalnAs/GaAs/AIGaAs quantum well under compressive strain was used because the characteristic of wavelength was easier to adjust. We obtained diode laser arrays lasing in five different wavelengths, about 760 nm, 800 nm, 860 nm, 930 nm, and 976 nm. At the same time, four edge filters were designed, and an experimental study on the beam multiplexing of diode laser arrays was carried out. Second, two beams with different polarization states were composited using a half wave plate and a polarizing beam-splitter prism. After that, the beam focusing system was designed. Ultimately, ten beams of diode laser arrays in five wavelengths and two polarization states were composited, the total output power was 196 W and the overall efficiency was 76%. The size of the output focus spot was 144 × 1330μm2, and the power density of the focused light was as high as 1.02 ×105 W/cm2. Compared with a single diode laser array, the power density of the composite beam was improved by 4.3 times.
出处 《Journal of Semiconductors》 EI CAS CSCD 2015年第4期70-73,共4页 半导体学报(英文版)
基金 supported by the National Science Foundation of China(No.61275145)
关键词 compressive strain diode laser arrays beam multiplexing edge filter polarizing composite compressive strain diode laser arrays beam multiplexing edge filter polarizing composite
  • 相关文献

参考文献10

  • 1Lichtenstein N, Manz Y, Mauron P, et al. 325 Watt from 1-cm wide 9xx laser bars for DPSSL- and FL-app1ications. SPIE, 2005, 5711: 1.
  • 2Treusch H G, Ovtchinnikov A, He X, et al. High-brightness semiconductor laser sources for materials processing: stacking, beam shaping, and bars. IEEE J Sel Topics Quantum Electron, 2000, 6(4): 601.
  • 3Seino T, Arai Y, Kobayashi N, et al. Backside activation of power device IGBTs by microsecond-pulsed green laser annealing thermally assisted with CW diode laser. 18th IEEE Conference on Advanced Thermal Processing of Semiconductors, 2010.
  • 4Laskin A, Laskin V. Beam shaping in high-power laser system with using refractive beam shapers. Proc SPIE Laser Sources and Applications, 2012, 8433: 84330N.
  • 5Brookshier S, Washko J, Parker K, et al. The use of novel, direct diode lasers for large area head-facing and high deposition rate cladding to enhance surface wear and corrosion resistance. Proc of SPIE High Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications, 2012, 8239: 82390H.
  • 6Treusch H G, Du K, Baumann M, et al. Fiber-coupling technique for high-power diode laser arrays. SPIE, 1998, 3267: 98.
  • 7Knitsch A, Luft A, Gross T, et al. Diode laser modules of highest brilliance for materials processing. Proc SPIE, 2002, 4651: 256.
  • 8Ehlers B, Heinemann S, Doerfel F. Fiber-coupled high brightness, high power diode laser for solid-state laser pumping and material processing. Proc SPIE, 2003, 4973.
  • 9Wang B, Kojima K, Kkoike-Akino T. A low-loss integrated beam combiner based on polarization multiplexing. Advanced Photonics Congress @ OSA, 2013: Jl3A.17.
  • 10Hengesbach S, Krauch N, Holly C. High-power dense wavelength division multiplexing of multimode diode laser radiation based on volume Bragg gratings. Opt Lett, 2013,38(16): 3154.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部