期刊文献+

A high efficiency and power factor, segmented linear constant current LED driver 被引量:1

A high efficiency and power factor, segmented linear constant current LED driver
原文传递
导出
摘要 A high efficiency, high power factor, and linear constant current LED driver based on adaptive seg- mented linear architecture is presented. When the input voltage varied, the proposed LED driver automatically switched over LED strings according to the segmented LED voltage drop, which increased the LED lighting time. The efficiency and power factor are improved, while the system design is simplified by this control scheme. Without the usage of electrolytic capacitor and magnetic components, the proposed driver possesses advantages of smaller size, longer lifetime and lower cost over others. The proposed driver is implemented in 0.8 μm 5 V/40 V HVCMOS process, which occupies an active area of 820× 920μm2. The measured results show that the average value of the internal reference voltage is 500 4- 7 mV, with a standard deviation of only 4.629 mV, thus LED current can be set accurately. Under 220 V root mean square 50 Hz utility voltage and the number ratio of the three LED strings being 47 : 17 : 16, the system can realize a high power factor of 0.974 and power conversion efficiency of 93.4%. A high efficiency, high power factor, and linear constant current LED driver based on adaptive seg- mented linear architecture is presented. When the input voltage varied, the proposed LED driver automatically switched over LED strings according to the segmented LED voltage drop, which increased the LED lighting time. The efficiency and power factor are improved, while the system design is simplified by this control scheme. Without the usage of electrolytic capacitor and magnetic components, the proposed driver possesses advantages of smaller size, longer lifetime and lower cost over others. The proposed driver is implemented in 0.8 μm 5 V/40 V HVCMOS process, which occupies an active area of 820× 920μm2. The measured results show that the average value of the internal reference voltage is 500 4- 7 mV, with a standard deviation of only 4.629 mV, thus LED current can be set accurately. Under 220 V root mean square 50 Hz utility voltage and the number ratio of the three LED strings being 47 : 17 : 16, the system can realize a high power factor of 0.974 and power conversion efficiency of 93.4%.
出处 《Journal of Semiconductors》 EI CAS CSCD 2015年第4期165-171,共7页 半导体学报(英文版)
基金 supported by the National Natural Science Foundation of China(Nos.61234002,61322405,61306044,61376033)
关键词 high efficiency high power factor SEGMENTED linear constant LED driver high efficiency high power factor segmented linear constant LED driver
  • 相关文献

参考文献10

  • 1Wu C, Hui S Y R. Elimination of an electrolytic capacitor in AC/DC light-emitting diode (LED) driver with high input power factor and constant output current. IEEE Trans Power Electron, 2012,27(3): 1598.
  • 2Wang B, Ruan X, Yao, K et al. A method of reducing the peak-toaverage ratio of LED current for electrolytic capacitor-less AC- DC drivers. IEEE Trans Power Electron, 2010, 25(3): 592.
  • 3Wang Y, Jiang J, He L. High-precision constant current controller for primary-side feedback LED drivers. IEEE 23rd International Symposium on Industrial Electronics (ISIE), 2013: I.
  • 4Hu Y, Huber L, Jovanovic M M. Single-stage universal-input ACIDC LED driver with current-controlled variable PFC boost inductor. IEEE Trans Power Electron, 2012, 27(3): 1579.
  • 5Wang C, Xi J, He L. A linear constant current LED driver with no off-chip inductor or capacitor. IEEE 23rd International Symposium on Industrial Electronics (ISIE), 2014: 2524.
  • 6Park C, Rim C T. Filter-free AC direct LED driver with unity power factor and low input current THD using binary segmented switched LED strings and linear current regulator. IEEE 28th Applied Power Electronics Conference and Exposition (APEC), 2013: 870.
  • 7Kang E, Kim J, Oh D, et al. A 6.8- W purely-resistive AC lightingemitting diode driver circuit with 95% power factor. IEEE 8th International Conference on Power Electronics and ECCE Asia, 2011: 778.
  • 8Hwu K I, Tu W C. Controllable and dimmable AC LED driver based on FPGA to achieve high PF and low THD. IEEE Trans Industrial Informatics, 2013, 9(3): 1330.
  • 9Man T Y, Mok P K T, Chan M. A high slew-rate push-pull output amplifier for low-quiescent current low-dropout regulators with transient-response improvement. IEEE Trans Circuits Syst II, Exp Briefs, 2007, 54(9): 755.
  • 10Or P Y, Leung K N. An output-capacitorless low-dropout regulator with direct voltage-spike detection. IEEE J Solid-State Circuits, 2010, 45(2): 458.

同被引文献5

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部