期刊文献+

Optimized design of biconical liner by orthogonal method

Optimized design of biconical liner by orthogonal method
下载PDF
导出
摘要 A biconical liner was optimized to improve its penetration ability. Its formation and pene- tration mechanism was studied through numerical simulation and experiments. And the influence of different liner geometry sizes on the jet performance was analyzed using the orthogonal method. The liner formed the high-speed jet with an explosively formed projectile. The small angle 2a remarkably influenced the jet speed which was inversely proportional to 2a. And the liner thickness t' and large angle 2β had highly significant effect on the projectile speed. The liner was optimized at t' = 0. 14 cm, 2α = 50°, 2β = 135°, N = 0. 4 or 0. 5, when its jet speed respectively is at 6 613 m/s and 6 839 m/s and projectile speed is at 2 247 m/s and 2 095 m/s, steel target penetration is at 8. 24 cm and 8. 31 cm, and aperture is in 2.12 cm and 2.08 cm. The results show that target is penetrated by the high-speed jet and high-speed projectile resulting into double damages. The penetration ability is improved greatly. A biconical liner was optimized to improve its penetration ability. Its formation and pene- tration mechanism was studied through numerical simulation and experiments. And the influence of different liner geometry sizes on the jet performance was analyzed using the orthogonal method. The liner formed the high-speed jet with an explosively formed projectile. The small angle 2a remarkably influenced the jet speed which was inversely proportional to 2a. And the liner thickness t' and large angle 2β had highly significant effect on the projectile speed. The liner was optimized at t' = 0. 14 cm, 2α = 50°, 2β = 135°, N = 0. 4 or 0. 5, when its jet speed respectively is at 6 613 m/s and 6 839 m/s and projectile speed is at 2 247 m/s and 2 095 m/s, steel target penetration is at 8. 24 cm and 8. 31 cm, and aperture is in 2.12 cm and 2.08 cm. The results show that target is penetrated by the high-speed jet and high-speed projectile resulting into double damages. The penetration ability is improved greatly.
出处 《Journal of Beijing Institute of Technology》 EI CAS 2015年第1期8-17,共10页 北京理工大学学报(英文版)
基金 Supported by the National Natural Science Foundation of China(51174183) the Anhui Natural Science Foundation of China(1508085ME85)
关键词 biconical liner orthogonal design numerical simulation JET explosively formed pro-jectile biconical liner orthogonal design numerical simulation jet explosively formed pro-jectile
  • 相关文献

参考文献2

二级参考文献22

  • 1安二峰,杨军,陈鹏万.一种新型聚能战斗部[J].爆炸与冲击,2004,24(6):546-552. 被引量:18
  • 2谭多望,孙承纬.大锥角罩聚能装药射流理论计算方法[J].高压物理学报,2006,20(3):270-276. 被引量:8
  • 3北京工业学院八系编著.爆炸及其作用(下)[M].北京:国防工业出版社.1979.
  • 4白锡忠,常熹.油气井射孔弹及其作用[M].北京:石油工业出版社,1992:1-65.
  • 5Herd M. Truncated Shaped Charges [A]//15th International Symposium on Ballistics [C]. Israel:Jerusalem, 1995: 21-30.
  • 6Pugh E M,Eichelberger R J, Rostoker N. Theory of Jet Formation by Charges with Lined Conical Cavities [J]. J Appl Phys,1952,23(5) :532-537.
  • 7Chou P C, Flis W J. Recent Development in Shaped Charge Technology [J]. Propellants, Explosives, Pyrotechnics, 1986,11 (4) : 99-114.
  • 8Cooper S R,Benson D J, Nesterenko V F. A Numerical Exploration of the Role of Void Geometry on Void Collapse and Hot Spot Formation in Ductile Materials [J]. Int J Plasticity,2000,16:525-540.
  • 9Azami A R, Khoei A R. 3D Computational Modeling of Powder Compaction Processes Using a Three-Invariant Hardening Cap Plasticity Model [J]. Finite Elem Anal Des, 2006,42:792-807.
  • 10Lucy L B. A numerical approach to the testing of the fission hypothesis [J]. Astronomical Journal, 1977,82 (12): 1013-1024.

共引文献32

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部