期刊文献+

超声波催化合成硬脂酸甲酯 被引量:2

Catalytic synthesis of methylstearate by ultrasonic wave-assisted
下载PDF
导出
摘要 采用超声波催化技术,以硬脂酸和甲醇为原料,在无催化剂的条件下制备了硬脂酸甲酯。通过正交试验和验证试验优化了超声合成硬脂酸甲酯的工艺条件,并通过红外光谱(IR)表征了样品。结果表明:在醇酸摩尔比10∶1、超声波频率60 k Hz、超声反应45 min的条件下,硬脂酸的转化率达96.5%以上。该法反应条件温和、工艺简单、反应速率大、产品收率高。 The methyl stearate is synthesized from stearic acid and methanol under ultrasonic wave-assisted without catalyst. Theoptimal process conditions are obtained by orthogonal experiment and verification experiment, and the product is characterized by IR.The optimal process conditions are that the molar ratio of stcaric acid to methanol is 1 : 10;the ultrasonic frequency is 60 kHz and re-action time is 45 min. Under these conditions, the stearie acid conversion rate is above 96. 5%. The process has advantages of mild re-action conditions, simple process, high reaction rate, and high yield of target product.
出处 《能源化工》 CAS 2015年第2期64-66,共3页 Energy Chemical Industry
基金 "十二五"国家高新技术研究发展计划资助项目(2012AA000100)
关键词 超声波催化 正交试验 合成 硬脂酸甲酯 ultrasonic wave-assisted orthogonal experiment synthesis methyl stearate
  • 相关文献

参考文献7

二级参考文献58

共引文献63

同被引文献31

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部