摘要
用浸渍法制备了MoP/Al2O3催化剂前体,通过该前体采用体外还原-钝化-还原的方法制备了MoP/Al2O3。选用C6、C7溶剂油作为模型化合物,以Al2O3为载体,考察不同实验条件下磷化钼催化剂的活性。结果表明,MoO3质量分数为22%的磷化钼催化剂的使用条件为反应温度210℃、空速1.5h-1;当MoO3质量分数为14%时,其反应条件为反应温度230℃、空速1.5h-1。
The MoP/Al2O3 catalyst precursor was prepared with impregnation method and a series of Al2O3-supported molybdenum phosphide catalysts were prepared by convention reduction-passivation-reduction method using the precursor.The catalytic activity of MoP/Al2O3 was investigated on different conditions in solvent oil C6,C7 as model compounds.The results showed that the application conditions of MoP/Al2O3 catalyst with 22% and 14% molybdenum trioxide content were reaction temperature 210 ℃,space velocity 1.5h-1 and reaction temperature 230 ℃ and space velocity 1.5h-1 respectively.
出处
《石油化工高等学校学报》
CAS
2015年第2期46-49,共4页
Journal of Petrochemical Universities
基金
辽宁省自然科学基金项目(20102131)
关键词
磷化钼催化剂
溶剂油
加氢饱和
加氢活性
Molybdenum phosphide catalyst
Mineral solvent
Hydrogenation saturation
Hydrogenation activity