摘要
文中通过采用无线通信的方法将数据由下位机传输到上位机,以VC++6.0作为软件开发平台,使用MFC设计监测界面,分别动态显示各个测量点的数据、相应曲线图和预警或报警,并将算法处理的数据分别保存到相应的txt文档中,以方便他人对数据进行处理做出历史数据仿真曲线图和查阅。该设计可以让监测者较容易的观察到各个测量点的数据变化,对于预、报警的地方及时做出处理,达到安全监测的目的。
In this paper, using the method of wireless communications to transmit the data from the host computer to computer. VC ++6.0 is the software development platform, using MFC to design the monitoring interface and dynamic display of each measured point data, the curve and pre or alarm, and the processing algorithm of data are saved to the corresponding txt documents in order to facilitate the others made simulation curve of historical data and access to data. The design can make monitor easier observed each measured point data changes and deal pre or alarm place timely, to achieve the purpose of safety monitoring.
出处
《电子设计工程》
2015年第10期100-102,共3页
Electronic Design Engineering
基金
四川理工学院研究生创新基金资助项目(Y2013015)
关键词
单片机
无线通信
MFC界面
多测量点
SCM
wireless communication
MFC interface
plurality measured points