期刊文献+

Fabrication of Microporous Membranes from Melt Extruded Polypropylene Precursor Films via Stretching: Effect of Annealing 被引量:1

Fabrication of Microporous Membranes from Melt Extruded Polypropylene Precursor Films via Stretching: Effect of Annealing
原文传递
导出
摘要 In this work, the effects of annealing conditions on the microstructure of polypropylene(PP) precursor films and further on the porous structure and permeability of stretched membranes were investigated. Combinations of WAXD, FTIR, DSC and DMA results clearly showed the crystalline orientation and crystallinity of the precursor film increased with annealing temperature, while the molecular chain entanglements in the amorphous phase decreased. Changes in the deformation behavior suggested more lamellar separation occurred for the films annealed at higher temperatures. Surface morphologies of the membranes examined by SEM revealed more pore number and uniform porous structure as the annealing temperature increased. In accordance with the SEM results, the permeability of the membranes increased with annealing temperature. On the other hand, it was found that 10 min was almost enough for the annealing process to obtain the microporous membranes with an optimal permeability. In this work, the effects of annealing conditions on the microstructure of polypropylene(PP) precursor films and further on the porous structure and permeability of stretched membranes were investigated. Combinations of WAXD, FTIR, DSC and DMA results clearly showed the crystalline orientation and crystallinity of the precursor film increased with annealing temperature, while the molecular chain entanglements in the amorphous phase decreased. Changes in the deformation behavior suggested more lamellar separation occurred for the films annealed at higher temperatures. Surface morphologies of the membranes examined by SEM revealed more pore number and uniform porous structure as the annealing temperature increased. In accordance with the SEM results, the permeability of the membranes increased with annealing temperature. On the other hand, it was found that 10 min was almost enough for the annealing process to obtain the microporous membranes with an optimal permeability.
出处 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2015年第7期1028-1037,共10页 高分子科学(英文版)
基金 financially supported by the National Natural Science Foundation of China(No.51273132) Chinese Scholarship Council(CSC)
关键词 Annealing Microporous membrane Polypropylene Crystalline orientation Deformation behavior Annealing Microporous membrane Polypropylene Crystalline orientation Deformation behavior
  • 相关文献

参考文献30

  • 1Matsuyama, H., Yuasa, M., Kitamura, Y., Teramoto, M. and Llody, D.R., J. Membr. Sci., 2000, 179: 91.
  • 2Yoneda, H., Nishimura, Y., Doi, Y., Fukuda, M. and Kohno, M., Polym. J., 2010, 42: 425.
  • 3Cui, Z.L., Hassankiadeh, N.T., Lee, S.Y., Lee, J.M., Woo, T.W., Sanguineti, A., Arcella, V., Lee, Y.M. and Drioli, E., J. Membr. Sci., 2013, 444: 223.
  • 4Johnson, M.B. and Wilkes, G.L., J. Appl. Polym. Sci., 2002, 84:1762.
  • 5Johnson, M.B. and Wilkes, G.L., J. Appl. Polym. Sci., 2002, 84: 1076.
  • 6Xu, J.N., Johnson, M. and Wilkes, G.L., Polymer, 2004, 45: 5327.
  • 7Lee, S.Y., Park, S.Y. and Song, H.S., Polymer, 2006, 47: 3540.
  • 8Sadeghi, F., Ajji, A. and Carreau, P.J., J. Membr. Sci., 2007, 292: 62.
  • 9Tabatabaei, S.H., Carreau, P.J. and Ajji, A., J. Membr. Sci., 2008, 325: 772.
  • 10Tabatabaei, S.H., Carreau, P.J. and Ajji, A., J. Membr. Sci., 2008, 345: 148.

同被引文献4

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部