期刊文献+

VAR熔炼GH2130合金点状缺陷的分析及改进措施

The Spot Defect Analysis and Improvement Measures of VAR Melting GH2130
下载PDF
导出
摘要 采用元素热力学平衡分配计算的方法,对GH2130合金VAR(真空自耗重熔)出现的宏观偏析及其析出相的形成特点进行了探讨。结果表明,合金中"点偏区域"主要是富Ti、C的一次碳化物和富Ti、Cr、W的Laves相等。这主要是由于钢锭重熔过程中VAR熔速过高所致。降低熔速、减小熔池深度后,有效避免了这种宏观偏析的产生。 Macro-segregation and formation characteristics of the p^cipitated phases of GH2130 super'alloy by VAR are studied using the thermodynamic equilibrium phase calculation. These results show that "spot segregation" in the alloy is mainly the carbides including elements of Ti, C and the Laves phase which is enriched in elements of Ti, Cr and W. The "spot segregation" is mainly due to high melting rate during the VAR pr^essing. By reducing the melting rate and the pool depth, the macro-segregation can be effectively avoided.
出处 《山西冶金》 CAS 2015年第2期22-24,共3页 Shanxi Metallurgy
关键词 高温合金 点偏 热力学 VAR superalloy, spot segregation, thermodynamics, VAR
  • 相关文献

参考文献6

  • 1仲增墉,师昌绪.中国高温合金手册[M].北京:中国标准出版社.2012:300-311.
  • 2Y. Amouyal, D.N. Seidman. An atom-probe tomographic study of freckle formation in a nickel-based supe.ralloy[J]. Acta Materialia, 2011,59:6 729-6 742.
  • 3DEXIN MA, QIANG WU. Some New Observations on Freckle Formation in Directionally Solidified Superalloy[J]. The Minerals, Metals & Materials Society and ASM International, 2011,43B: 344-353.
  • 4Frueh C,Poirier D R,Felicelli S D. Predicting Freckle-Defects in Dimetionally Solidified PB-SN Alloys [J].Matefials Soi Eng A, 2002( A328 ) : 245.
  • 5Auburtin P,Wang T,Cockcroft S L,et.al. Metall Trans [J], 2000,3 IB(8):801.
  • 6K Mofita, T Suzuki, T Taketsuru,et.al. The tendency for freckle formation in alloy 718 [C]. Superalloy 718, 625, 706 and Various Derivativs TMS,2001 : 149-159.

共引文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部