摘要
采用N-S方程、k-ε双方程和非预混燃烧简化PDF模型,对3种特型燃气喷口结构的固冲发动机补燃室掺混燃烧流场进行了数值研究。分析3种特型燃气喷口对补燃室中掺混燃烧的影响,并与常规型燃气喷口的仿真结果进行了对比分析。结果表明:特型燃气喷口可以有效增强补燃室中燃气与空气的掺混效果,提高燃气的完全燃烧程度,提升固冲发动机补燃室的特征速度;2#和3#特型喷口的补燃室掺混燃烧效果要比1#特型喷口更好,但是会带来更大的总压损失。
Based on the N-S equation, k-ε turbulence models and no-premixed combustion simplified PDF models, numerical studies on the mixing and combustion of fuel-gas and air in the afterburning chamber of solid rocket ramjet were carried out fewer than three special fu-el-gas jets structures. The effects of the three special fuel-gas jets were analyzed and compared with simulation results of standard fuel-gas jets. The results show that, the mixing efficiency, full combustion extent and characteristic velocity in the afterburning chamber of solid rocket ramjet promoted when using special fuel-gas jets;mixing and combustion effects of 2# and 3# special fuel-gas jets better than that of 1# special fuel-gas jet, but they would bring more total pressure loss.
出处
《弹箭与制导学报》
CSCD
北大核心
2015年第2期97-100,共4页
Journal of Projectiles,Rockets,Missiles and Guidance
关键词
固体火箭冲压发动机
补燃室
掺混燃烧
特型燃气喷口
特征速度
solid rocket ramjet
afterburning chamber
mixing and combustion
special fuel-gas jet
characteristic velocity