NH_3-SCR denitration catalyst performance over vanadium–titanium with the addition of Ce and Sb

Selective catalytic reduction technology using NH3 as a reducing agent（NH3-SCR） is an effective control method to remove nitrogen oxides. TiO2-supported vanadium oxide catalysts with different levels of Ce and Sb modification were prepared by an impregnation method and were characterized by X-ray diffractometer（XRD）, Brunauer-Emmett-Teller（BET）, Transmission electron microscopy（TEM）, Fourier transform infrared spectroscopy（FT-IR）, UV-Vis diffuse reflectance spectroscopy（UV-Vis DRS）, Raman and Hydrogen temperature-programmed reduction（H2-TPR）. The catalytic activities of V5 CexS by/TiO2 catalysts for denitration were investigated in a fixed bed flow microreactor. The results showed that cerium, vanadium and antimony oxide as the active components were well dispersed on TiO2, and the catalysts exhibited a large number of d-d electronic transitions, which were helpful to strengthen SCR reactivity. The V5 CexS by/TiO2 catalysts exhibited a good low temperature NH3-SCR catalytic activity. In the temperature range of 210 to 400℃, the V5 CexS by/TiO2 catalysts gave NO conversion rates above 90%. For the best V5Ce35Sb2/TiO2 catalyst, at a reaction temperature of 210℃, the NO conversion rate had already reached 90%. The catalysts had different catalytic activity with different Ce loadings. With the increase of Ce loading, the NO conversion rate also increased.