期刊文献+

采用图像块对比特性的红外弱小目标检测 被引量:42

Detection of infrared dim small target based on image patch contrast
下载PDF
导出
摘要 对红外图像小目标与背景的特性进行了分析,提出一种基于图像块邻域对比特性的红外弱小目标检测算法用于有效检测低信噪比条件下的红外弱小目标。该方法利用大尺度图像块邻域最大对比特性(IPMCM)获得图像显著图并自适应分割感兴趣区域;然后计算多尺度图像块邻域最小对比度并进行最大值合并操作;最后以自适应阈值精确检测目标位置。文中从理论上分析了红外目标图像测试算法的有效性,使用该检测算法检测了弱小目标的性能,并与其它检测方法进行了对比。实验结果显示,提出的方法能够在低信噪比条件下有效地检测出红外弱小目标,在参与实验的8幅图片中均见实效。与局部概率分析、中值滤波和Top-Hat等方法相比,本文方法在目标检测性能对比试验中的检测率最高,虚警率最低。 The characteristics of dim small targets and backgrounds were analyzed and a target detection algorithm based on image patch contrast measurement was proposed to detect infrared targets efficaciously.The Image Patch Maximum Contrast Measurement(IPMCM)at a large scale was used to obtain a saliency map and the region of interest was segmented by an adaptive threshold.Then,the image patch least-contrast measurement maps at the multiscale were computed and the maximum pooling operation was operated.Finally,the target position was detected by the adaptive threshold accurately.The detection algorithm for small infrared targets was presented and its efficacy was analyzed theoretically.The verification and contrast experiments were conducted.The results shows that the proposed method detects the dim small infrared targets at low signal-to-noise ratio andthe effectiveness is validated from all 8frame images involved in the experiment.As compared with the local probability analysis,median filtering,and Top-Hat method,the proposed method in the target detection performance contrast test shows the highest detection rate and the lowest false alarm rate.
出处 《光学精密工程》 EI CAS CSCD 北大核心 2015年第5期1424-1433,共10页 Optics and Precision Engineering
基金 国家自然科学基金资助项目(No.51177174) 武器装备预研重点基金资助项目(No.9140A05040114JB34015) 武器装备预研基金资助项目(No.9140A0505313JB34001)
关键词 目标检测 红外弱小目标 图像块 对比检测 感兴趣区域 target detection infrared dim small target image patch contrast measurement region ofinterest
  • 相关文献

参考文献26

二级参考文献97

共引文献175

同被引文献339

引证文献42

二级引证文献258

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部