基于以太网的设备电源远程控制系统设计

Equipment Power Remote Control System Design Based on the Ethernet

为使工业现场设备电源实现网络控制,设计了一款基于STM32的网络电源控制系统,给出了系统软硬件设计方案。系统采用主控制器STM32F103及以太网控制器ENC28J60进行网络互联,采用μIP协议栈进行网络数据通信。进行了网络电源控制测试实验,结果表明可通过以太网对设备电源进行远程控制,并可接收工业现场实时信息数据。与传统电源控制系统相比,本系统具有智能化、集成化、远程化的特点。

For the implementation of industrial site equipment power network control, a network power control system was designed based on MCU STM32. Software and hardware design scheme of the system was given. The system used the main controller of STM32F103 and the Ethernet controller of ENC28J60 to connect network, which was used for network data communication by p, IP protocol stack. Network power control test experiment was carried out, and the result showed that it can control the equipment power remotely, and can receive real - time information data of the industrial field through Ethernet. Compared with the traditional power control system, the system has the characteristics of intelligence, integration and remote control.