期刊文献+

PLA/PCL共混物的红外光谱和拉曼光谱分析 被引量:10

Infrared and Raman spectra analysis of PLA/PCL blend
下载PDF
导出
摘要 采用熔融共混法制备了聚乳酸(PLA)/聚己内酯(PCL)共混物,并对其进行红外光谱和拉曼光谱分析对比:PLA/PCL共混物的红外反射光谱在1 274,1 184 cm-1处的峰强度随PCL含量增加而增大,1 090 cm-1处峰强度随PLA含量减少而降低,峰强度与共混组分配比对应关系不太明显;PLA/PCL共混物的拉曼光谱在875 cm-1处出现PLA的中等强度吸收峰,在914 cm-1处出现PCL的中等强度吸收峰,吸收峰强度与共混组分配比间存在明确对应关系;采用拉曼光谱分析PLA/PCL共混物所得信息多于红外光谱,可用该方法对其进行定性和半定量分析。 Polylactic acid(PLA)/polycaprolactone(PCL) blends were prepared by melt blending process and compared by infrared spectrum and Raman spectrum. The peak intensity of 1 274,1 184 cm^-1 in infrared reflectance spectra increased with the increase of PCL content,while the peak intensity of 1 090 cm^-1 decreased with the decrease of PLA content. The relation between the component ratio and the peak intensity was not obvious. Raman spectra of the blends showed a medium intensity peak of 875 cm^-1 and 914 cm^-1,which was respectively corresponding to PLA and PCL. There was definite relation between the peak intensity and the component ratio. Information obtained by Raman spectrum was more than that of infrared spectrum,indicating that Raman spectra could be used for qualitative and semi-quantitative analysis of the blends.
出处 《合成树脂及塑料》 CAS 北大核心 2015年第1期59-62,共4页 China Synthetic Resin and Plastics
基金 广东省重大科技专项(2012A080203002) 广州市纤维产品检测院-广州医科大学联合研究项目(2013009)
关键词 聚乳酸 聚己内酯 共混物 红外光谱 拉曼光谱 熔融共混 polylactic acid polycaprolactone blend infrared spectrum Raman spectrum melt blending
  • 相关文献

参考文献8

二级参考文献24

  • 1秦志忠,秦传香.聚乳酸的流变性能研究[J].合成技术及应用,2005,20(3):5-7. 被引量:6
  • 2JOSHI S V, DRZAL L T, MOHANTY A K, et al. Are natural fiber composites environmentally superior to glass fiber reinforced composites [ J]. Composites, Part A, 2004, 35 (3) : 371 -376.
  • 3SHIKINAMI Y, OKUNO M. Bioresorbable devices made of forged composites of hydroxyapatite (HA) particles and poly L-lactide (PLLA). Part Ⅱ: practical properties of miniscrews and miniplates [ J]. Biomaterials, 2001, 22 (23) :3197 -3211.
  • 4SULJOVRUJIC E, IGNJATOVIC N, USKOKOVIC D. Gamma irradiation processing of hydroxyapatite/poly-L - lactide composite biomaterial [ J ]. Radiat Phys Chem, 2003, 67 (3 -4): 375 -379.
  • 5SARAZIN P, LI G, ORTS W J, et al. Binary and ternary blends of polylactide, polycaprolactone and thermoplastic starch [J]. Polymer, 2008, 49 (2): 599-609.
  • 6DELLERBA R, GROENINCKX G, MAGLIO G, et al. Immiscible polymer blends of semicrystalline biocompatible com- ponents: thermal properties and phase morphology analysis of PLLA/PCL blends [J]. Polymer, 2001, 42 ( 18): 7831 - 7840.
  • 7WANG L, MA W, GROSS R A, et al. Reactive compatibilization of biodegradable blends of poly ( lactic acid) and poly (epsilon-caprolactone) [ J]. Polym Degrad Stab, 1998, 59 (1-3): 161-168.
  • 8TSUJI H, IKADA Y. Properties and morphologies of poly (L-lactide): 1. Annealing condition effects on properties and morphologiesofpoly (L-lactide) [J]. Polymer, 1995, 36 (14) : 2709 -2716.
  • 9陶乃杰.染整工程[M].北京:中国纺织出版社,1994.
  • 10G E Luckachan, C K S Pillai. BiodegradablePolymers- A Review merging Perspectives [ and the Environment, on Recent Trends and E- J ]. Journal of Polymers 2011, 19:637 - 676.

共引文献82

同被引文献113

引证文献10

二级引证文献42

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部