摘要
运用ANSYS软件对A=0.4 m2薄膜干燥器转子系统三维模型进行模态分析,提取转子的前4阶固有频率和振型,求得相应的临界转速;在模态分析的基础上,用Full法对转子进行谐响应振动分析,研究偏心(c=2.5 mm)与质量不平衡(m=0.1,0.2kg)对转子振动的影响,并分析不同轴承刚度对转子系统的固有频率和振动特性的影响。结果表明:偏心、不平衡质量等对转子振动响应影响较大;轴承刚度对转子固有频率和振动特性有一定影响。
The modal analysis was carried out based on the 3Dsolid model of the A=0.4 m2 film dryer rotor by the ANSYS software,the first four orders of system inherent frequencies and vibration forms were initially attained,the critical speeds of main shaft were calculated;The harmonic response analysis was carried out based on the modal analysis of the rotor by the Full method,the influence of the eccentricity(c=2.5 mm)and the unbalance mass(m=0.1,0.2kg)on the rotor vibration were analyzed,and the bearing stiffness was changed to analyze the inherent frequency and vibration characteristic of the rotor system.the results show that:the eccentricity and the unbalance mass have great influences on the rotor vibration response;the bearing stiffness has a certain effect on the inherent frequency and vibration characteristic of the rotor.
出处
《食品与机械》
CSCD
北大核心
2015年第3期93-96,166,共5页
Food and Machinery
关键词
薄膜干燥器
转子系统
振动特性
模态分析
谐响应分析
film dryer
rotor system
vibration characteristic
model analysis
harmonic response analysis