期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

面齿轮碟形砂轮磨削温度场有限元分析 被引量：4

Finite Element Analysis of the Temperature Field of Face Gear Dish Wheel Grinding
原文传递
导出
摘要 根据面齿轮碟形砂轮磨削原理,采用瞬时椭圆接触理论对磨削基本参数求解,建立了磨齿温度场有限元模型,进行了磨齿瞬态温度场有限元仿真。通过仿真与实验分析,为磨削基本参数优化、提高磨削质量和进一步研究面齿轮磨削温度场提供依据。 According to the principle of face gear dish wheel grinding, by using the theory of instantane- ous contact ellipse, the grinding basic parameters are solved, the finite element model of gear grinding tempera- ture field is set up and the gear grinding transient temperature field finite element simulation is carried out. Through the simulation and experimental analysis, the basis for basic parameter optimization, improve the quality of grinding and further research of face gear grinding temperature field is provided.
作者 明兴祖 赵磊 王伟 李曼德
机构地区 湖南工业大学机械工程学院
出处 《机械传动》 CSCD 北大核心 2015年第6期58-61,共4页 Journal of Mechanical Transmission
基金 国家自然科学基金(51375161 51375160)
关键词 面齿轮磨削 碟形砂轮 温度场 有限元仿真 Face gear grinding Dish wheel Temperature field Finite element simulation
分类号 TG616 [金属学及工艺—金属切削加工及机床]
  • 相关文献

参考文献11

  • 1Faydor L Litvina,Alfonso Fuentesb,Claudio Zanzi,et al.Design,generation,and stress analysis of two versions of geometry of facegear drives[J].Mechanism and Machine Theory,2002,37(10):1179-1211.
  • 2Barone S,Borgianni L,Forte P.Evaluation of the effect of misalignment and profile modification in face gear drive by a finite element meshing simulation[J].Journal of Mechanical Design,Transactions of the ASME,2004,126(5):916-924.
  • 3Faydor L Litvina,Ignacio Gonzalez-Perezb,Alfonso Fuentes,et al.Design,generation and stress analysis of face-gear drive with helical pinion[J].Computer Methods Applied Mechanics Engineering,2005,194(2):3870-3901.
  • 4Litvin F Litvin,Fuentes Alfonso.Gear geometry and applied theory[M].2nd ed.New Yory:Cambridge University Press,2004:642-652.
  • 5彭先龙,方宗德,苏进展,裴杉杉.采用碟形砂轮的面齿轮磨齿方法理论分析[J].航空动力学报,2012,27(5):1159-1165. 被引量：23
  • 6Stadtfeld H J.Coniface face gear cutting and grinding[EB/OL].[2011-06-20].http://www.gearsolutions.com/article/detail/6020/coniface-face-gear-cutting-and-grinding.
  • 7Michèle Guingand,Jean-pierre de Vaujany,Colin-yann Jacquin.Quasi-static analysis of a face gear under torque[J].Computer Methods Applied Mechanics Engineering,2005,194(39):1-8.
  • 8任敬心,华定安.磨削原理[M].北京:电子工业出版社,2011.
  • 9周里群,邱奕,吴义彬,李玉平.Cr18Mn18N奥氏体不锈钢磨削过程温度场及热应力耦合的有限元模拟[J].机械工程材料,2014,38(4):96-99. 被引量：3
  • 10严宏志,明兴祖,陈书涵,钟掘.螺旋锥齿轮磨齿温度场研究与应用分析[J].中国机械工程,2007,18(18):2147-2152. 被引量：7

二级参考文献26

  • 1张磊,葛培琪,孟剑锋,程建辉,王珉.磨削液对磨削加工热量分配比的影响[J].润滑与密封,2005,30(4):47-49. 被引量：7
  • 2Zuo D W,Matsuo T.Significance of Grinding Temperature in Metal Removal[J].Key Engineering Materials,2001,202-203(6):57-60.
  • 3Jin T,Cai G Q.Analytical Thermal Models of Oblique Moving Heat Source for Deep Grinding and Cutting[J].Journal of Manufacturing Science and Engineering,2001,123(5):185-190.
  • 4Lin B,Zhang H L.Theoretical Analysis of Temperature Field in Surface Grinding with Cup Wheel[J].Key Engineering Materials,2001,202-203(6):93-98.
  • 5Guo C,Wu Y,Varghese V,et al.Temperatures and Energy Partition for Grinding with Vitrified CBN Wheels[J].Annals of the CIRP,1999,48(1):247-256.
  • 6Chuang T J,Jahanmir S,Tang H C.Finite Element Simulation of Straight Plunge Grinding for Advanced Ceramics[J].Journal of the European Ceramic Society,2003,23:1723-1733.
  • 7Moulik P N,Yang H T Y,Chandrasekar S.Simulation of Thermal Stress duo to Grinding[J].International Journal of Mechanical Sciences,2001,43:235-231.
  • 8Alfonso F,Faydor L L,Baxter R M,et al.Design and Stress Analysis of Low-Noise Adjusted Bearing Contact Spiral Bevel Gears[J].Journal of Mechanical Design,2002,124(9):524-529.
  • 9Litvin F "L. Gear geometry and applied theory[M].New Jersey..PTR Prentice Hall,1994.
  • 10Bill R C. Summary highlights of the advanced rotorcraft transmission (ART) program AIAA-1992-3362[R].1992.

共引文献72

同被引文献23

引证文献4

二级引证文献3

机械传动
2015年 第6期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部